This paper investigates the effects of the various factors on combustion noise without increasing nitrogen oxides (NOx) in different operating conditions, especially at idle by using a combustion-simulation computer program (KIVA) and orthogonal array. Results indicated that the effects of pilot or split injection, compression ratio, and dynamic injection timing on combustion noise were strong at idle, while the effects of induction swirl ratio and number of injector holes were weak. Injection rate shaping, pilot or split injection, and double injections showed promising reduction in combustion noise and NOx simultaneously at the idle condition. The selected optimized injector (a split injection) for combustion noise reduction at the idle engine operating condition created different rate shapings from the base-line engine at medium speed and full load. This injector lowered combustion noise and NO x at medium speed and full load in comparison with the baseline injector. Generally, the pilot or split injection and double split injections are beneficial to reduce combustion noise and NOx. at idle. Their effects are reduced as engine speed and load are increased such that no significant reduction in combustion noise occurs at high speeds and high loads.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A numerical study of the use of pilot or split rate injection to reduce diesel engine noise


    Weitere Titelangaben:

    Numerische Untersuchung der Nutzung von Pilot- oder Teilmengeneinspritzung zur Geräuschminderung bei Dieselmotoren


    Beteiligte:


    Erscheinungsdatum :

    2007


    Format / Umfang :

    8 Seiten, 12 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch





    A numerical study of the use of pilot or split rate injection to reduce diesel engine noise

    Chaffarpour,M.R. / Noorpoor,A.R. / Univ.of Illinois at Chicago,US | Kraftfahrwesen | 2007




    Modulation of Injection Rate to Improve Direct Injection Diesel Engine Noise

    Young, C.D. / Russell, M.F. / Nicol, S.W. | SAE Technical Papers | 1990