Since Engineering Critical Assessment (ECA) became a standard procedure for assessing pipeline girth weld defects, sizing has become a major issue. Despite claims and requests for better sizing, most pipeline trials have shown that sizing accuracies are only within about 1 mm at best in the vertical (through-wall) direction, and typically worse in the horizontal (circumferential) plane due to beam spread. Defect sizing requirements are becoming more stringent as new high-strength pipes and new applications are being introduced. This applies especially to thick-walled offshore pipelines, particularly tendons and risers, where fatigue life is critical. This project has developed a curved 1.5D matrix array, primarily for improving focusing in the horizontal direction on thick-walled risers and tendons. Initially, the focusing was modelled for a variety of arrays, including the standard flat array. Modelling showed the optimum array to be 120 elements long, with three rows, with a slight curvature for initial focusing. Detailed focusing can be performed using the electronic capability of phased arrays. Normal unfocused PipeWIZARD phased arrays use 60-element arrays on either side of the weld; in contrast, the new array uses 360 elements for one-side only inspection. The results from this array were compared with the standard unfocused 1D array on a typical calibration block; significant improvements were obtained.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Improved focusing for thick-wall pipeline girth weld inspections using phased arrays


    Weitere Titelangaben:

    Verbesserte Fokussierung bei der Prüfung dickwandiger Pipelineumfangsschweißungen mit Gruppenstrahlern


    Beteiligte:
    Moles, M. (Autor:in) / Labbe, S. (Autor:in) / Zhang, J. (Autor:in)

    Erschienen in:

    Insight ; 47 , 12 ; 769-776


    Erscheinungsdatum :

    2005


    Format / Umfang :

    8 Seiten, 28 Bilder, 4 Tabellen, 11 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Pipeline girth weld inspections using ultrasonic phased arrays

    Moles, M. / Dube, N. / Labbe, S. et al. | Tema Archiv | 2004


    Pipeline girth weld inspections using ultrasonic phased arrays

    Moles, Michael / Dube, Noel / Ginzel, Ed | Tema Archiv | 2003


    Pipeline girth weld inspections using ultrasonic phased arrays

    Moles, M. / Dube, N. / Ginzel, E. | Tema Archiv | 2002


    Ultrasonic phased arrays for pipeline girth weld inspections

    Moles, M. / Dube, N. / Russell, M. | Tema Archiv | 2000