This paper presents a two-phase cooling method using R134a refrigerant to dissipate the heat energy (loss) generated by power electronics (PE) such as those associated with rectifiers, converters, and inverters for a specific application in hybrid-electric vehicles (HEVs). The cooling method involves submerging PE devices in an R134a bath, which limits the junction temperature of PE devices while conserving weight and volume of the heat sink without sacrificing equipment reliability. First, experimental tests that included an extended soak for more than 300 days were performed on a submerged IGBT and gate-controller card to study dielectric characteristics, deterioration effects, and heat flux capability of R134a. Results from these tests illustrate that R134a has high dielectric characteristics, no deterioration on electrical components, and a heat flux of 114 W/cm2 for the experimental configuration. Second, experimental tests that included simultaneous operation with a mock automotive air-conditioner (A/C) system were performed on the same IGBT and gate controller card. Data extrapolation from these tests determined that a typical automotive A/C system has more than sufficient cooling capacity to cool a typical 30 kW traction inverter. Last, a discussion and simulation of active cooling of the IGBT junction layer with R134a refrigerant is given. This technique will drastically increase the forward current ratings and reliability of the PE device.
Two-phase cooling method using R134a refrigerant to cool power electronic devices
2005
7 Seiten, 10 Quellen
Aufsatz (Konferenz)
Englisch
R134a Refrigerant Charge Determination Test Method
SAE Technical Papers | 2018
R134a Refrigerant Automotive Air-Conditioned Hose
SAE Technical Papers | 2005
R134a Refrigerant Automotive Air-Conditioning Hose
SAE Technical Papers | 1999
R134a Refrigerant Automotive Air-Conditioned Hose
SAE Technical Papers | 2011