Vehicle exhaust flow is difficult to measure accurately and with high precision due to the highly transient nature of the cyclic events which are dependent on engine combustion parameters, varying exhaust gas compositions, pulsation effects, temperature and pressure. Bag mini-diluter (BMD) is becoming one of the few technologies chosen for SULEV and PZEV exhaust emission measurement and certification. A central part of the BMD system is an accurate and reliable exhaust flow measurement which is essential for proportional bag fill. A new device has been developed to accurately and reliably calibrate exhaust flow measurement equipments such as the E-Flow. The calibration device uses two different size laminar flow elements (LFE), a 40 CFM (1.13 cbm/min) LFE for low end calibration and a 400 CFM (11.32 cbm/min) LFE for higher flows. A blower is used to push flow through a main flow path, which then devides into two flow pathways, one for each of the two LFE's. A deverter valve is used to control the flow to the different flow paths with any excess flow being deverted outside of the cart to waste. A detailed description of the construction of the calibration device and the software is discussed in this paper. Calibration data and a repeatability study are discussed and analyzed.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Development of vehicle exhaust flow measurement calibration device


    Beteiligte:
    Yassine, M. (Autor:in) / Dhatt, R. (Autor:in) / Berndt, R. (Autor:in) / Marji, M. (Autor:in) / Blumke, D. (Autor:in) / Laymac, T. (Autor:in)


    Erscheinungsdatum :

    2004


    Format / Umfang :

    8 Seiten, 5 Bilder, 2 Tabellen, 10 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of Vehicle Exhaust Flow Measurement Calibration Device

    Yassine, M. / Dhatt, R. B. / Marji, M. et al. | British Library Conference Proceedings | 2004


    Development of Vehicle Exhaust Flow Measurement Calibration Device

    Blumke, Dennis / Yassine, Mahmoud / Marji, Majed et al. | SAE Technical Papers | 2004


    Development of vehicle exhaust flow measurement calibration device

    Yassine,M. / Dhatt,R. / Berndt,R. et al. | Kraftfahrwesen | 2004


    2004-01-1436 Development of Vehicle Exhaust Flow Measurement Calibration Device

    Yassine, M. / Dhatt, R. / Berndt, R. et al. | British Library Conference Proceedings | 2004


    Exhaust Flow Meter Calibration

    Wroza, Larry / Guenther, Mark / Polster, Mark | SAE Technical Papers | 2004