In 2001 the FKFS took into operation state-of-the-art 5-belt systems for road simulation in the IVK automotive wind tunnel and in the IVK model wind tunnel. In these systems, a narrow belt running between the vehicles' wheels is fitted with 4 balance-mounted wheel rotation drives and a vehicle restraint system. The FKFS opted for MTS steel belt technology due to its small size and excellent tracking stability. The flat-belt wheel rotation units in the full-scale wind tunnel permit aerodynamic force measurements at full wheel bad up to 70 m/s. In combination with the hydrostatic suspension of these units, integrated force transducers permit realistic measurements of the wheels' rolling resistance. In the model wind tunnel FKFS wheel rotation units with Poly-V belt are used with reduced wheel loads up to 80 m/s. The models' mounting on the balance is carried out automatically for the first time ever by a manipulator designed by WBI. Investigations of the boundary layer, as well as minimization of the boundary layer thicknesses surrounding the vehicle by suction and blowing, combined with the 'block'-profile of the boundary layer above the center belt yielded a good approximation of the situation above a wide 1-belt-system. In combination with boundary layer control, the introduction of road simulation entails increases in aerodynamic drag and decreases of lift. In production cars, added interference of the wheel rotation generally yields reductions of drag. Retroactions from static floor pressures acting on belt surfaces of the wheel rotation units exposed to the test-section floor result in excessively high lift values requiring correction, as opposed to pads with the size of the tire contact area. First approaches are promising.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Die Straßenfahrt-Simulation in den IVK-Windkanälen - Ausführung und erste Ergebnisse


    Weitere Titelangaben:

    The road simulation in the IVK wind tunnels - design and first results


    Beteiligte:
    Potthoff, J. (Autor:in) / Wiedemann, J. (Autor:in)


    Erscheinungsdatum :

    2003


    Format / Umfang :

    28 Seiten, 28 Bilder, 20 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Deutsch




    Autokran fuer schnelle Strassenfahrt

    Gottwald,Leo,Duesseldorf | Kraftfahrwesen | 1977


    Hochbetrieb in Windkanälen

    Online Contents | 2012


    Halbmodellmesstechnik in Windkanälen

    Eder, Stephan | SLUB | 2006


    Halbmodellmesstechnik in Windkanälen

    Eder, Stephan | Tema Archiv | 2006


    Vorbereitung eines Mobilkrans für die Straßenfahrt

    GERWIEN EDWIN / KOKOT DENNIS | Europäisches Patentamt | 2015

    Freier Zugriff