Failure of the ceramic gun-barrel lining during single-shot and burst firing events has been studied by combining a finite-element method based thermo-mechanical analysis with a structural reliability analysis. An initial distribution of residual stresses in the lined barrel, as introduced during shrink-fitting of the steel jacket over the ceramic lining, is taken into account. Forced-convection boundary conditions at the inner surface of the barrel are determined by carrying out an internal-ballistic analysis, followed by compressible boundary-layer modeling of the heat transfer coefficient. The results obtained reveal that due to thermal expansion of the steel jacket during single-shot and burst ballistic events, tensile axial stresses develop in the ceramic lining near the barrel ends. These stresses are sufficiently high, particularly in the case of burst firing, that they can induce formation of circumferential cracks and, in turn, failure of the lining. Using the Weibull structural reliability analysis, the failure probability for the lining has been computed as 0.0025 and 0.0121 for the single-round and the 10-round firing modes, respectively. Optimization of the main design, materials and processing parameters in order to minimize the failure probability for the lining is also discussed.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Reliability analysis of hybrid ceramic/steel gun barrels


    Beteiligte:
    Grujicic, M. (Autor:in) / Delong, J.R. (Autor:in) / Derosset, W.S. (Autor:in)


    Erscheinungsdatum :

    2003


    Format / Umfang :

    16 Seiten, 19 Quellen




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Englisch




    Ceramic gun barrels

    Kohnken, K.H. | Tema Archiv | 2002


    Machining cylinder barrels

    Engineering Index Backfile | 1942


    Device for moving construction barrels

    RUBY KYLE | Europäisches Patentamt | 2018

    Freier Zugriff

    DEVICE FOR MOVING CONSTRUCTION BARRELS

    RUBY KYLE | Europäisches Patentamt | 2016

    Freier Zugriff

    Loading barrels into box cars

    Engineering Index Backfile | 1936