This paper describes the weldabilits and shielding characteristics of ultra high strength steel for Deep Submersible Research Vehicle (DSRV). 10Ni-8Co steel is selected for the pressure hull of DSRV to be operated under sea 6000 m in depth, that is a double quenched and tempered (aged) ultra high strength steel with proof stress above 120 kg/mm2. Generally, TIG welding is employed for this steel to obtain high strength and notch toughness. Besides this, it has been said that this steel is very sensitive to the contamination of various gas elements, and so perfect welding is required. From this point of view, triple shielding type narrow groove TIG torch has been developed to satisfy that requirement, and performance test was carried out at various shielding conditions to investigate their basic properties and to confirm the effectiveness of that shielding equipment. The results obtained are summarized as follows: Mechanical properties of weld metal are related to nitrogen and oxygen content of weld metal. In the case of triple shielding method (Ar shielding gas), nitrogen and oxygen content of weld metal areas same as thorse of base metal. It is confirmed that triple shielding type TIG torch is very effective to prevent the contamination of weld joint. (Wassmann)


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen


    Exportieren, teilen und zitieren



    Titel :

    Study on the weldability of ultra high strength steel for deep submersible research vehicle


    Weitere Titelangaben:

    Untersuchung der Schweissbarkeit von ultrahochfestem Stahl fuer ein Tiefseeforschungsfahrzeug
    Titel japanisch


    Beteiligte:
    Takeda, T. (Autor:in) / Yamada, S. (Autor:in) / Fukunaga, I. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    1981


    Format / Umfang :

    8 Seiten, 19 Bilder, 5 Tabellen, 2 Quellen


    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Print


    Sprache :

    Japanisch




    Stress corrosion cracking of high strength steel for pressure hull of deep submersible vehicle

    Yamada, S. / Matsumura, H. / Ikeda, T. et al. | Tema Archiv | 1981


    Tailored blanks of high strength steel sheets - Weldability and formability

    Uchihara, M. / Hirose, Y. / Fukui, K. | Tema Archiv | 1998


    Weldability of advanced high strength steel drawn arc stud welding

    Hsu, Christopher / Mumaw, James W. | Tema Archiv | 2011


    Submersible ultra-deep protective device and method

    DAI MING / XU YIJUN / SHI KAI et al. | Europäisches Patentamt | 2015

    Freier Zugriff

    Tailored blanks of high strength steel sheet - weldability and formability

    Uchihara,M. / Hirose,Y. / Fukui,K. et al. | Kraftfahrwesen | 1998