This paper addresses modelling, longitudinal control design and implementation for heavy-duty vehicles (HDVs). The challenging problems here are: (a) an HDV is mass dominant with low power to mass ratio; (b) They possess large actuator delay and actuator saturation. To reduce model mismatch, it is necessary to obtain a nonlinear model which is as simple as the control design method can handle and as complicated as necessary to capture the intrinsic vehicle dynamics. A second order nonlinear vehicle body dynamical model is adopted, which is feedback linearizable. Beside the vehicle dynamics, other main dynamical components along the power-train and drive-train are also modelled, which include turbocharged diesel engine, torque converter, transmission, transmission retarder, pneumatic brake and tyre. The braking system is the most challenging part for control design, which contains three parts: Jake (engine compression) brake, air brake and transmission retarder. The modelling for each is provided. The use of engine braking effect is new complementary to Jake (compression) brake for longitudinal control, which is united with Jake brake in modelling. The control structure can be divided into upper level and lower level. Upper level control uses sliding mode control to generate the desired torque from the desired vehicle acceleration. Lower level control is divided into two branches: (a) engine control: from positive desired torque to desired fuel rate (engine control) using a static engine mapping which basically captures the intrinsic dynamic performance of the turbo-charged diesel engine; (b) brake control: from desired negative torque to generate Jake brake cylinder number to be activated and ON/OFF time periods, applied pneumatic brake pressure and applied voltage of transmission retarder. Test results are also reported.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Heavy-duty vehicle modelling and longitudinal control


    Beteiligte:
    Lu, Xiao-Yun (Autor:in) / Hedrick, J. Karl (Autor:in)

    Erschienen in:

    Vehicle System Dynamics ; 43 , 9 ; 653-669


    Erscheinungsdatum :

    2005-09-01


    Format / Umfang :

    17 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    Heavy-duty vehicle modelling and longitudinal control

    Lu, Xiao-Yun | Online Contents | 2005


    Heavy-duty vehicle modelling and longitudinal control

    Lu,X.Y. / Hedrick,J.K. / Univ.of California,Berkeley,US | Kraftfahrwesen | 2005


    Longitudinal Control of a Heavy-Duty Vehicle

    Fagerström, Jonathan | BASE | 2016

    Freier Zugriff

    HEAVY DUTY VEHICLE TIRE IMPROVED LONGITUDINAL GROOV

    DO SUNG JIN | Europäisches Patentamt | 2015

    Freier Zugriff

    Heavy duty vehicle tire improved longitudinal groov

    Europäisches Patentamt | 2015

    Freier Zugriff