Aiming at preventing frequently occurred coupler jack-knifing in slave control locomotives of 20,000-tonne heavy-haul trains, a theoretical and experimental research on enhancing the coupler stability has been carried out. Field tests are conducted to ascertain the load characteristics of the slave control locomotive, and the coupler stability mechanism of the locomotive is studied. A dynamic simulation model considering the locomotive, adjacent wagons, and attached coupling devices is established and validated. Based on the model, countermeasures for improving the coupler stability are studied. The field test results indicate that: 1) the slave control locomotives suffer from sustained compressive forces less than 1500kN at the braking stage of cycle braking, while the maximum short-term impact force at the release stage exceeds 2000kN; 2) The coupler jack-knifing mostly occurs at the braking stage, and the yaw angles of the middle couplers are larger than the front and rear couplers. According to the theoretical analysis and dynamic simulation results, the coupler stability can be improved by increasing the stiffness of secondary lateral bump stops and reducing its clearance. Moreover, the proposed countermeasure of setting up lateral bump stop to locomotive couplers is proved to be effective to prevent the coupler jack-knifing.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Countermeasures for preventing coupler jack-knifing of slave control locomotives in 20,000-tonne heavy-haul trains during cycle braking


    Beteiligte:
    Ge, Xin (Autor:in) / Ling, Liang (Autor:in) / Chen, Shiqian (Autor:in) / Wang, Chao (Autor:in) / Zhou, Yichang (Autor:in) / Xu, Binjie (Autor:in) / Wang, Kaiyun (Autor:in)

    Erschienen in:

    Vehicle System Dynamics ; 60 , 9 ; 3269-3290


    Erscheinungsdatum :

    2022-09-02


    Format / Umfang :

    22 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Unbekannt




    Coupler separation of slave locomotive in a 20,000-tonne combined heavy-haul train during air-braking release

    Wu, Jian / Ling, Liang / Zhou, Kun et al. | Taylor & Francis Verlag | 2023



    Analysis of the car body stability performance after coupler jack-knifing during braking

    Guo, Lirong / Wang, Kaiyun / Chen, Zaigang et al. | Taylor & Francis Verlag | 2018



    Derailment risk due to coupler jack-knifing under longitudinal buff force

    Chen, D. | British Library Online Contents | 2010