Normally, Maglev (magnetic levitation) vehicles run on elevated guideways. The elevated guideway must satisfy various load conditions of the vehicle, and has to be designed to ensure ride quality, while ensuring that the levitation stability of the vehicle is not affected by the deflection of the guideway. However, because the elevated guideways of Maglev vehicles in South Korea and other countries fabricated so far have been based on over-conservative design criteria, the size of the structures has increased. Further, from the cost perspective, they are unfavourable when compared with other light rail transits such as monorail, rubber wheel, and steel wheel automatic guided transit. Therefore, a slender guideway that does have an adverse effect on the levitation stability of the vehicle is required through optimisation of design criteria. In this study, to predict the effect of various design parameters of the guideway on the dynamic behaviour of the vehicle, simulations were carried out using a dynamics model similar to the actual vehicle and guideway, and a limiting value of deflection ratio of the slender guideway to ensure levitation control is proposed. A guideway that meets the requirement as per the proposed limit for deflection ratio was designed and fabricated, and through a driving test of the vehicle, the validity of the slender guideway was verified. From the results, it was confirmed that although some increase in airgap and cabin acceleration was observed with the proposed slender guideway when compared with the conventional guideway, there was no notable adverse effect on the levitation stability and ride quality of the vehicle. Therefore, it can be inferred that the results of this study will become the basis for establishing design criteria for slender guideways of Maglev vehicles in future.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Design and validation of a slender guideway for Maglev vehicle by simulation and experiment


    Beteiligte:
    Han, Jong-Boo (Autor:in) / Han, Hyung-Suk (Autor:in) / Kim, Sung-Soo (Autor:in) / Yang, Seok-Jo (Autor:in) / Kim, Ki-Jung (Autor:in)

    Erschienen in:

    Vehicle System Dynamics ; 54 , 3 ; 370-385


    Erscheinungsdatum :

    2016-03-03


    Format / Umfang :

    16 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Design and validation of a slender guideway for Maglev vehicle by simulation and experiment

    Han,J.B. / Han,H.S. / Kim,S.S. et al. | Kraftfahrwesen | 2016


    Maglev Guideway Design Issues

    Plotkin, D. / Kim, S. | British Library Online Contents | 1997


    Maglev Guideway Design Issues

    Plotkin, Don | Online Contents | 1997


    Maglev vehicle/guideway dynamic interaction based on vibrational experiment

    Namjin Lee, / Hyungsuk Han, / Jongmin Lee, et al. | IEEE | 2007