In order to assess the crashworthiness of simple magnesium structures the axial deformation behaviour of different hollow rectangular profiles produced from wrought magnesium alloys Mg–3wt.%Al–1wt.%Zn–0.3wt.%Mn and Mg–1wt.%Zn–0.4wt.%rare earth mischmetal were investigated under quasi-static compressive loading conditions. Laser beam welding was applied to build the crush configurations from plane rolled sheets; indirect extrusion was used to manufacture seamless profiles. Numerical simulations were conducted to predict and assess the crush behaviour. The simulation results revealed that the material work hardening rates evidenced in uniaxial compression tests together with the cross section influenced the buckling modes as well as the energy dissipation. The performance of the magnesium profiles in terms of dissipated specific energy is better than that of aluminium profiles for small compressive displacements. However, for large displacements, shear-compressive failure limited the crush displacement and hence the energy dissipation. The weld itself did not influence the failure and the energy dissipation of the respective structure. For the alloy and process development of wrought magnesium, prospective improvements towards higher dissipated energy can be realised by increasing not only the strength but also the hardening rate of the material.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Experimental and numerical crushing analyses of thin-walled magnesium profiles


    Beteiligte:
    Steglich, D. (Autor:in) / Tian, X. (Autor:in) / Bohlen, J. (Autor:in) / Riekehr, S. (Autor:in) / Kashaev, N. (Autor:in) / Kainer, K.U. (Autor:in) / Huber, N. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2015-03-04


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Numerical Investigation on Axial Crushing of Double-Arrowed NPR Filled Thin-Walled Tubes

    Ge, Chengqiang / SUN, Huiming / Wang, Liangmo et al. | SAE Technical Papers | 2021


    Quasi-static axial crushing of thin-walled steel tapered tubes with hybrid geometry: experimental and numerical investigation

    Lykakos, Stavros / Kostazos, P. K. / Manolakos, D. E. | Taylor & Francis Verlag | 2022



    Dynamic Axial Crushing of Triggered Aluminium Thin-Walled Columns

    Montanini, R. / Belingardi, G. / Vadori, R. | British Library Conference Proceedings | 1997