Purpose. The work is aimed to study the use efficiency of fine-grained heat-strengthened steels (mainly 10G2FB) for steel bunker capacities. At the same time, the structural scheme of such a structure using corrugated steel sheets is considered as the main variant. Methodology. To achieve this purpose, a series of numerical calculations was carried out for a steel bunker capacity of a pyramidal-prismatic type with overall dimensions in plan view of 6×5.2 m and a total height of 4.5 m. The capacity was designed for complicated working conditions, in particular, increased loads, including long-term dynamic ones. The potential possibility of operating the container under conditions of high or low temperatures was also taken into account. At the same time, both the traditional structural scheme of a bunker capacity with horizontal stiffening ribs and the developed structural scheme based on corrugated steel sheets were analyzed. The calculations were carried out by the finite element method based on the SCAD for Windows project complex. Findings. Based on the results of the analysis and comparison of the data obtained in numerical calculations, it was found that the use of fine-grained heat-strengthened high-strength steels (for example, steel 10G2FB) for bunker capacities, both the traditional structural scheme with stiffening ribs and the developed structural scheme based on corrugated sheets, allows reducing material consumption by about 30% in both cases. At the same time, due to the good performance of fine-grained heat-strengthened steel 10G2FB, both at high and at low temperatures, it can be effectively used for steel bunker capacities that work in difficult conditions. Originality. The possibility and efficiency of the use of fine-grained, heat-strengthened high-strength steels for the construction of a steel bunker capacity is estimated. At the same time, such an estimation was given not only for structures of the traditional structural scheme with horizontal stiffening ribs, but also for bunkers with a developed structural scheme based on corrugated sheets. Practical value. From a practical point of view, quantitative parameters of the stress-strain state were obtained during investigations of various design variants for a steel bunker capacity. The data are presented in a compact form that is easy to evaluate and compare. They allow us to state about the improvement of the operation characteristics of capacities and the potential reduction of the risks of their failures and accidents during operation.

    Мета. У роботі передбачено дослідити ефективність застосування дрібнозернистих термозміцнених сталей (переважно марки 10Г2ФБ) для сталевих бункерних ємностей. При цьому як основний варіант розглянуто конструктивну схему такої споруди з використанням сталевих гофрованих листів. Методика. Для досягнення поставленої мети проведено серію чисельних розрахунків сталевої бункерної ємності пірамідально-призматичного типу з габаритними розмірами в плані 6×5,2 м й загальною висотою 4,5 м. Ємність спроектовано для ускладнених умов роботи, зокрема підвищених навантажень, у тому числі й тривалих динамічних. Також до уваги взято потенційну можливість експлуатації ємності за умов підвищених або понижених температур. При цьому проаналізовано як традиційну конструктивну схему бункерної ємності з горизонтальними ребрами жорсткості, так і розроблену конструктивну схему на основі сталевих гофрованих листів. Обчислення проведено методом скінченних елементів на базі проектного комплексу SCAD for Windows. Результати. На підставі аналізу та зіставлення отриманих під час чисельних розрахунків даних установлено, що застосування дрібнозернистих термозміцнених сталей високої міцності (на прикладі сталі марки 10Г2ФБ) для бункерних ємностей як традиційної конструктивної схеми з ребрами жорсткості, так і розробленої конструктивної схеми на основі гофрованих листів дозволяє знизити матеріалоємність споруди приблизно на 30 % в обох випадках. При цьому завдяки хорошим показникам роботи як за підвищених, так і за понижених температур дрібнозерниста термозміцнена сталь марки 10Г2ФБ може бути ефективно застосована для сталевих бункерних ємностей, які працюють в ускладнених умовах. Наукова новизна. Оцінено можливість та ефективність застосування дрібнозернистих термозміцнених сталей високої міцності для конструкції сталевої бункерної ємності. Причому подібну оцінку надано не тільки для споруд традиційної конструктивної схеми з горизонтальними ребрами жорсткості, а й для бункерів із розробленою конструктивною схемою на основі гофрованих листів. Практична значимість. Із практичної точки зору в ході проведених досліджень різноманітних конструктивних варіантів сталевої бункерної ємності отримано кількісні показники напружено-деформованого стану. Дані представлено в компактній та зручній для оцінки й зіставлення формі. Вони дозволяють стверджувати про поліпшення експлуатаційних характеристик ємностей і потенційне зниження ризиків їх відмов та аварій під час експлуатації.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Use of Fine-Grained Heat-Strengthened Steels to Increase the Operation Qualities of Bunker Capacities from Thin-Walled Galvanized Profiles.
    Застосування дрібнозернистих термозміцнених сталей для підвищення експлуатаційних якостей бункерних ємностей із тонкостінних оцинкованих профілів




    Erscheinungsdatum :

    2021-02-15


    Anmerkungen:

    Science and Transport Progress ; No. 1(91) (2021); 84-93



    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch






    АЕРОДИНАМІЧНІ ХАРАКТЕРИСТИКИ РЕШІТОК ПРОФІЛІВ З ГАЗОМЕХАНІЧНИМ РЕГУЛЮВАННЯМ

    Ю.М. Терещенко / В.М. Дихановський / І.Ф. Кінащук | DOAJ | 2008

    Freier Zugriff


    КОНЦЕПЦІЯ НАВІГАЦІЇ НА ОСНОВІ ЕКСПЛУАТАЦІЙНИХ ХАРАКТЕРИСТИК

    О.Є. Луппо / В.А. Лазоренко / А.С. Губаренко | DOAJ | 2010

    Freier Zugriff