The design of controllers for the automatic operation of airborne vehicles is challenging. Especially in the emerging research field of airborne wind energy, where tethered aircraft convert energy from wind at higher altitudes into electricity, the development of robust and safe control systems will be a critical success factor. Typically, these systems consist of one or more controlled aircraft, a ground station, and one or more tethers that transfer aerodynamic forces acting on the wings to the ground. To understand these systems and control them for real-time simulations, suitable tether models must extend the classical flight mechanical models. In this paper, a hybrid approach is presented, combining an elastic spring model with a catenary model of the tether. In particular, for real-time simulations in a model-in-the-loop environment where a static modeling approach is sufficient, this hybrid model is intended to provide an alternative to the commonly used spring models. Furthermore, such a static tether model neglects high-frequency dynamic oscillations that can occur with dynamic lumped mass models. As consequence, the focus is on primary influences such as stiffness and sag due to external loads. The developed hybrid model is analyzed and compared with the spring model for a simulated tethered flight. It can be concluded that this hybrid static model, although subject to strong assumptions such as symmetrical tether sag, represents the tether more accurately. For example, it allows a more precise design of the flight controller before conducting any flight tests. This model can be used as a reasonable alternative to the simple spring model whenever a static modeling approach of the tether is adequate.


    Zugriff

    Download


    Exportieren, teilen und zitieren



    Titel :

    Hybrid modeling approach for the tether of an airborne wind energy system


    Weitere Titelangaben:

    CEAS Aeronaut J


    Beteiligte:
    Duda, D. F. (Autor:in) / Fuest, H. (Autor:in) / Islam, T. (Autor:in) / Ostermann, T. (Autor:in) / Moormann, D. (Autor:in)

    Erschienen in:

    CEAS Aeronautical Journal ; 13 , 3 ; 627-637


    Erscheinungsdatum :

    2022-07-01


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch





    Hybrid modeling approach for the tether of an airborne wind energy system

    Duda, Dominik / Fuest, Hendrik / Islam, Tobias et al. | DataCite | 2022


    Tether compensated airborne delivery

    BUCHMUELLER DANIEL | Europäisches Patentamt | 2020

    Freier Zugriff

    TETHER COMPENSATED AIRBORNE DELIVERY

    BUCHMUELLER DANIEL | Europäisches Patentamt | 2017

    Freier Zugriff

    Tether compensated airborne delivery

    BUCHMUELLER DANIEL | Europäisches Patentamt | 2017

    Freier Zugriff

    TETHER-BASED WIND ESTIMATION

    QIU IVAN | Europäisches Patentamt | 2024

    Freier Zugriff