Abstract The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Vibration reduction of H/Shaft using an electromagnetic damper with mode change


    Beteiligte:
    Lee, K. H. (Autor:in) / Bak, J. H. (Autor:in) / Park, J. -L. (Autor:in) / Lee, C. -H. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2017-01-12


    Format / Umfang :

    7 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Vibration reduction of H/Shaft using an electromagnetic damper with mode change

    Lee, K. H. / Bak, J. H. / Park, J. -L. et al. | Online Contents | 2017


    Vibration reduction of H/Shaft using an electromagnetic damper with mode change

    Lee, K. H. / Bak, J. H. / Park, J. L. et al. | British Library Online Contents | 2017


    Investigation of an electromagnetic damper for vibration control of a transmission shaft

    Nikolajsen,J.L. / Holmes,R. / Gondhalekar,V. et al. | Kraftfahrwesen | 1979


    Development of a Dual Mode Dynamic Damper for Vibration Reduction of Drive Shaft in a Passenger Car

    An, Kanghyun / Jeong, Haesung / Lee, Sang Kwon et al. | Springer Verlag | 2021


    Elastically mounted vibration damper for a shaft assembly

    BUZZARD DONALD A / ANSPAUGH MICHAEL P | Europäisches Patentamt | 2018

    Freier Zugriff