Due to steadily tightening exhaust emission legislations and average fleet consumption the optimization of Diesel engines and its after-treatment is necessary more than ever. Therefore, an optimized interaction between combustion and exhaust after treatment is getting more and more important for meeting further emission legislation targets and reducing fuel consumption. Due to its effective filtration efficiency of particulate matter, the wall-flow Diesel Particulate Filter (DPF) has been established as a basic technology of exhaust after-treatment. With increasing accumulation of particulate matter the exhaust back pressure rises, which necessitates a regeneration of the DPF at regular intervals. As the engine exhaust temperatures required for DPF regeneration are not achieved in normal combustion mode, except during full-load operation, the engine management system has to take different measures to raise the exhaust temperature, if no fuel additives are used. This is usually done by a special combustion mode with intake throttling and a modified injection profile. In order to make the combustion inefficient the fuel is injected as late as possible. The latest possible crank angle is limited by combustion stability. Exceeding this stability limit leads to unstable combustion and in the worst case to misfire.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Optimization of DPF regeneration with a cylinder pressure based combustion control


    Weitere Titelangaben:

    Proceedings


    Beteiligte:
    Bargende, Michael (Herausgeber:in) / Reuss, Hans-Christian (Herausgeber:in) / Wiedemann, Jochen (Herausgeber:in) / Held, Nikolaus (Autor:in) / Betz, T. (Autor:in) / Duvinage, F. (Autor:in) / Lückert, P. (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2015-05-06


    Format / Umfang :

    17 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Optimization of DPF regeneration with a cylinder pressure based combustion control

    Held,N. / Betz,T. / Duvinage,F. et al. | Kraftfahrwesen | 2015


    Cylinder Pressure-Based Control of Pre-Mixed Diesel Combustion

    Kruger, D. / Kelly, E. / Fattic, G. et al. | SAE Technical Papers | 2007


    Cylinder pressure-based control of pre-mixed diesel combustion

    Husted,H. / Kruger,D. / Fattic,G. et al. | Kraftfahrwesen | 2007


    Intra-Cylinder Combustion Pressure Sensing

    Morris, J. E. | SAE Technical Papers | 1987


    Intra-Cylinder Combustion Pressure Sensing

    Morris,J.E. | Kraftfahrwesen | 1987