The energy consumption and the greenhouse gases emission in order to manufacture Portland cement (PC) is very high. To find an alternative, the researchers initially replace the PC partially by Fly Ash. Later on, the researchers introduce a new binder which is being manufactured by the activation of ground granulated blast furnace slag (GGBFS). The paper presents the detail of the binder, manufactured by GGBFS and mild alkali as activator having the pH value of 10. The binder is manufactured by simple blending in which 85% is GGBFS, and 15% is the chemical activator. The test results of the alkali activated binder concrete (AABC) for compressive strength, splitting-tensile strength and flexural strength were found after exposure to elevated temperature 100 °C, 200 °C, 300 °C, 400 °C, 500 °C, 600 °C, 700 °C and 800 °C. It has been observed that these results of the AABC at elevated temperature were very much comparable with that of the ordinary Portland cement concrete (OPCC). The deterioration in strength starts from 200 °C onwards. No spalling of the alkali activated binder concrete (AABC) has been observed at elevated temperature even at 800 °C.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Influence of High Temperature on Non-Silicate Based Activated Blast Furnace Slag


    Weitere Titelangaben:

    Lecture Notes in Civil Engineering


    Beteiligte:
    Ha-Minh, Cuong (Herausgeber:in) / Dao, Dong Van (Herausgeber:in) / Benboudjema, Farid (Herausgeber:in) / Derrible, Sybil (Herausgeber:in) / Huynh, Dat Vu Khoa (Herausgeber:in) / Tang, Anh Minh (Herausgeber:in) / Kumar, Virendra (Autor:in) / Kumar, Amit (Autor:in) / Prasad, B. K. (Autor:in)


    Erscheinungsdatum :

    2019-10-11


    Format / Umfang :

    6 pages





    Medientyp :

    Aufsatz/Kapitel (Buch)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Efficient slag grabbing system for blast furnace granulated slag

    WANG DEGANG / JIN ZHENG / DUAN GUOJIAN et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    COMPOUNDING COMPOSITIONS FOR TIRE USING BLAST FURNACE SLAG

    Europäisches Patentamt | 2016

    Freier Zugriff

    COMPOUNDING COMPOSITIONS FOR TIRE USING BLAST FURNACE SLAG

    SON YEON SONG | Europäisches Patentamt | 2016

    Freier Zugriff


    Blast Furnace Slag as Sustainable Material in Concrete Pavements

    Jahangirnejad, Shervin / Van Dam, Thomas / Morian, Dennis et al. | Transportation Research Record | 2013