In order to increase the laser power for material processing, especially for welding applications, different set-ups for beam addition are used. The most widely used method is to overlay the beams of two or more independent lasers directly onto the workpiece. Welding results of aluminum alloys with two lasers in the 2 kW class are shown. The disadvantage of the large welding optics by using this method could be reduced if the laser beams are coupled into one optical fiber. Results of experiments with three identical cw Nd:YAG lasers with 150 W average power and a beam parameter product of 17 mm*mrad each are shown. Three different schemes for coupling these laser beams into one optical fiber are presented. One is to overlay the laser beams at the core of the fiber. Another scheme is to couple the laser beams into fibers and image the endfaces of these fibers onto one fiber endface. The last coupling scheme is to bundle the fibers and place them endface to endface in front of a thicker fiber. Losses and the beam parameter product behind the final fiber are compared. Also an oscillator-fiber-amplifier system is introduced. This yields a very simple system to increase the laser power under keeping of the beam quality.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Beam addition of Nd:YAG high-power lasers


    Beteiligte:
    Beck, Thomas (Autor:in) / Richter, Kurt (Autor:in) / Weber, Horst (Autor:in)

    Kongress:

    High-Power Lasers: Gas and Solid State Lasers ; 1996 ; Besancon,France


    Erschienen in:

    Erscheinungsdatum :

    1996-08-26





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Beam addition of Nd:YAG high-power lasers [2788-26]

    Beck, T. / Richter, K. / Weber, H. et al. | British Library Conference Proceedings | 1996


    Welding with high power Nd:YAG lasers

    Russell, D. | Tema Archiv | 2000


    Coherent Addition of Two Injection-Locked Nd:YAG Lasers

    Musha, M. / Kanaya, T. / Nakagawa, K. et al. | British Library Conference Proceedings | 2001


    Coherent addition of two injection-locked Nd:YAG lasers

    Musha, M. / Kanaya, T. / Nakagawa, K. et al. | IEEE | 2001


    Cutting with high-power Nd:YAG lasers and fiber for beam delivery [2207-18]

    Haferkamp, H. / Homburg, A. / Commission of the European Communities; Directorate General for Science, Research, and Development et al. | British Library Conference Proceedings | 1994