IC manufacturing at 65 nm node requires careful selection of imaging technology. To select appropriate approach, a wide range of impacts has to be considered. In particular, imaging, mask, and resist technologies all contribute to final CD control of the features patterned and their imaging latitude during IC manufacture. To select imaging strategy, we conducted simulation analysis of dry ArF, dry F2, and immersion ArF imaging technologies. During the selection process, each technology has to be evaluated at its imaging optimum defined in terms of projection lens NA and illuminator design as well as the mask design details; such analysis has to be specific to the requirements of the IC design critical levels. One of the key technology characteristics is the imaging tool impact on patterned level. This impact can be quantified by the projection lens aberration residue and its flare, both dependent on the image location. Introduction of aberration and flare signatures into the imaging analysis enables definition of tool performance metric common to the entire image field, and it spotlights across-field imaging tradeoffs. In addition to these factors (i.e. the imaging technology- and the tool-related impact), the impact of wafer stack on image formation in resist has to be considered. In particular, Fresnel losses, resist photochemistry, and optical path differences of diffraction orders in dense medium have to be accounted for. Such approach leads to estimates of resist refraction and contrast on the formation of critical features. This review presents comprehensive analysis of all key factors driving imaging latitude of critical levels at 65 nm node. These factors were representing impacts of imaging strategy, mask and resist technologies. The analysis presented below spotlights imaging tradeoffs of dry ArF, dry F2, and immersion ArF imaging technologies.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Technology qualification for 65-nm node


    Beteiligte:

    Kongress:

    Optical Microlithography XVIII ; 2005 ; San Jose,California,United States


    Erschienen in:

    Erscheinungsdatum :

    2004-05-12





    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    When is Qualification Not Qualification

    M. J. Simpson | NTIS | 2011


    Information technology curriculum for engineering management qualification

    Kamijo, Fumihiko | Springer Verlag | 1997

    Freier Zugriff


    FLECS: Mission for on-orbit technology qualification

    Buffa, D. / Ferrari, G. / Nebiolo, M. et al. | British Library Conference Proceedings | 2004


    The engineer of railway technology needs new qualification

    Lengowsky, Claudia | Online Contents | 2005