In this paper, a hybrid experimental-numerical approach was developed to analyze the constrained groove pressing and constrained groove pressing–cross route process on AA5052 sheets which are comprehensively used to produce body in white and closure panels and beams of the automotive. The microstructure and mechanical properties were evaluated using scanning electron microscopy, tensile tests, and microhardness measurements. Then, the developed procedure was used to predict the mechanical properties of the sheets fabricated by constrained groove pressing process. This enabled the evaluation of the effects of the groove angle, width, and height of the die on strength and hardness of the processed sheets. To complete the conceptual design of the grooved dies, the Taguchi method was used to optimize the die design. The obtained results show that the inhomogeneity factor in the sheets processed by constrained groove pressing–cross route is less than those processed by constrained groove pressing. The analysis indicates that the developed procedure would result in an acceptable prediction of the material behavior of the processed sheets. The procedure could save a great deal of time and is economical in the matter of design. Finally, the procedure in conjunction with Taguchi method would lead to an optimum die design to enrich the processed sheets.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Analysis of constrained groove pressing and constrained groove pressing-cross route process on AA5052 sheet for automotive body structure applications


    Beteiligte:
    Googarchin, H Saeidi (Autor:in) / Teimouri, B (Autor:in) / Hashemi, R (Autor:in)


    Erscheinungsdatum :

    2019-05-01


    Format / Umfang :

    17 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Bionic glue pressing groove for pneumatic sealing

    YAO YONGMING / GUAN XIANG / MU ZHENGZHI et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Pressing sheet device for automotive elevator

    CHEN HUANXIANG | Europäisches Patentamt | 2015

    Freier Zugriff

    TIRE GROOVE STRUCTURE IMPROVING GROOVE CRACK

    BAE SUNG RYUL / CHOI MYEONG RAK | Europäisches Patentamt | 2016

    Freier Zugriff

    GROOVE STRUCTURE

    SHINTANI RYOTA | Europäisches Patentamt | 2016

    Freier Zugriff

    Movable groove body winding device and groove body winding system

    TANG YUPING / LUO XIANGPING / NIU PING et al. | Europäisches Patentamt | 2020

    Freier Zugriff