The steady simulation with flow field and heat transfer performance for different rib layouts is investigated. By referring the GE-E3 turbine blade tip (Case 1) profile as a prototype model, four kinds of rib layouts of full rib structure (Case 2), half rib structure connected with suction side (Case 3), half rib structure connected with pressure side (Case 4), and half rib structure in the rear squealer cavity (Case 5) was designed. The availability of k-ω turbulence model was validated through comparison of heat transfer coefficient distribution with the experimental data. The area-averaged heat transfer coefficients of Case 5 decreases up to 11.3%, 3.1%, 11.3%, and 2.8% in comparison to Cases 1, 2, 3, and 4. The total pressure coefficient of Case 5 reduces by 1.4%, 2.7%, and 4.0% compared to Cases 1, 2, and 3. The results reveal that, among the five novel rib layout cases, Case 5 obtains the optimal comprehensive performance under the performance of considering tip heat transfer and cascade loss. Further investigation on the influence of Cases 1 and 5 at different rotational speeds on the flow field and heat transfer characteristics of the tip clearance is also illustrated and discussed.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effects of the novel rib layouts on the tip leakage flow pattern and heat transfer performance of turbine blade


    Beteiligte:
    Jiang, Shijie (Autor:in) / Li, Zhigang (Autor:in) / Li, Jun (Autor:in) / Song, Liming (Autor:in)


    Erscheinungsdatum :

    2020-06-01


    Format / Umfang :

    14 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Turbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects

    Stephens, Julia / Corke, Thomas / Morris, Scott | AIAA | 2007


    Turbine Blade Tip Leakage Flow Control: Thick/Thin Blade Effects AIAA Paper

    Stephens, J. / Corke, T. / Morris, S. et al. | British Library Conference Proceedings | 2007




    Turbine Blade Platform, Blade Tip and Shroud Heat Transfer

    Dunn, M. G. / Kim, J. / International Society for Air Breathing Engines; Australian Committee | British Library Conference Proceedings | 1995