Accurate estimation of road peak adhesion coefficient is of great significance in vehicle active safety systems. In order to prevent the vehicle from running out of control in actual driving process, the estimation algorithm should be able to adapt to various working conditions, and transmit estimated information of road peak adhesion coefficient to Electronic Control Unit (ECU) of the vehicle timely and accurately. Therefore, a new preprocessment method for the fusion estimation algorithm of road adhesion coefficient is proposed. The core of this method is the equal ratio relationship between the longitudinal, lateral peak adhesion coefficients and the utilization adhesion coefficient under adjacent typical roads. According to this relationship, this method accomplishes normalization of the tyre model in the form of introducing parameters from the outside, so that the tyre model can be combined with the filtering algorithm to be applied to estimation, which solves the problem that the precise tyre model cannot be used for road adhesion coefficient estimation due to its complex construction. This method can adapt to most of tyre models in the field of vehicle dynamics. In addition, the existing estimation algorithms need sufficient excitation (when the comprehensive slip ratio is 0.15–0.20) to estimate the accurate road peak adhesion coefficient. This method can greatly reduce the system error caused by insufficient road excitation, and can also obtain accurate estimation results when the excitation is insufficient. Finally, in order to verify the preprocessment method, the magic formula tyre model is used to describe the tyre characteristics. After processing by the preprocessment method, the road peak adhesion coefficient is estimated in combination with Unscented Kalman Filter (UKF). The high accuracy and timeliness of the estimated results in simulation and real vehicle tests verify the effectiveness of the preprocessment method.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A new preprocessment method for road peak adhesion coefficient fusion estimation


    Beteiligte:
    Han, Yinfeng (Autor:in) / Lu, Yongjie (Autor:in) / Wang, Hongwei (Autor:in) / Wang, Yang (Autor:in)


    Erscheinungsdatum :

    2024-01-01




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch






    Tire road adhesion coefficient multi-model fusion estimation method considering quality mismatch

    YIN GUODONG / WANG YAN / YAN YONGJUN et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    Road adhesion coefficient estimation method and system

    CHAO YUEDONG / QIAN PENGFEI / XIA DAXING et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Road adhesion coefficient estimation method and system based on multivariate information fusion

    SHAO LIANG / OH SUNG-YEOP / LIU YANJUN et al. | Europäisches Patentamt | 2022

    Freier Zugriff