This study is aimed to establish a detailed chemical reactor network model based on the analysis of complex reaction flowfield structures in aeroengine combustors, so that the emissions of nitrogen oxides and carbon monoxide from advanced civil aeroengines can be predicted quickly and accurately. In this study, a low-emission concentric staged combustor with three axial swirlers is designed for civil aeroengines, and numerical simulations of the three-dimensional reaction flowfields of the combustor during four load phases of takeoff, climb, approach, and idle, are conducted. Based on the numerical results, a simple chemical reactor network model with seven perfectly stirred reactors and a detailed chemical reactor network model using up to 15 perfectly stirred reactors are established. Using the developed chemical reactor network models and the detailed JP10 chemical reaction mechanism—composed of 374 step elementary reactions and 82 species, the emission variations of nitrogen oxides and carbon monoxide are predicted and compared with those estimated using an empirical formula and with the numerical results as a function of the combustion load. Using a combined chemical reactor network–computational fluid dynamics analysis method, the variations of the formation path, the mechanism, and the amounts of nitrogen oxides in the combustor and in the perfectly stirred reactors, are analyzed as a function of the combustion load. In addition, the effects of fuel and air pilot-to-total ratio on nitrogen oxides emissions for the 100% load condition are also analyzed. It is found that at high loads, the production rate of the thermal NO is the highest, while at low loads, the production rate of the prompt NO is the highest. The nitrogen oxide is mainly produced in the pilot zone and the recirculation zone, while its production in the outer main stage zone is low. The results show that the NOx emissions predicted by the complex chemical reactor network model are most consistent with those elicited using the empirical formula.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Predictions of NOx and CO emissions from a low-emission concentric staged combustor for civil aeroengines


    Beteiligte:
    Zhang, Qun (Autor:in) / Hai, Han (Autor:in) / Li, Chengyu (Autor:in) / Wang, Yuming (Autor:in) / Zhang, Peng (Autor:in) / Wang, Xin (Autor:in)


    Erscheinungsdatum :

    2020-04-01


    Format / Umfang :

    17 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Investigation of Emissions for Concentric Staged Lean Direct Injection Combustor

    Yu, Han / Suo, Jianqin / Zhu, Pengfei et al. | AIAA | 2019


    Emission Characteristics of an Axially Staged Sector Combustor

    He, Zhuohui J. / Capil, Tyler / Podboy, Derek et al. | AIAA | 2020


    EMISSION CHARACTERISTICS OF AN AXIALLY STAGED SECTOR COMBUSTOR

    He, Zhuohui J. / Capil, Tyler / Podboy, Derek et al. | TIBKAT | 2020


    NOx Emission of an Axial-Staged Combustor at High-Pressure

    Stiehl, Bernhard / Genova, Tommy / Otero, Michelle et al. | AIAA | 2020