This study describes the effects of the fuel injection angle and the multiple-injection strategies on the combustion, the emissions and the performance characteristics in a common-rail diesel engine. To conduct this investigation, a single-cylinder diesel engine with four valves was used, and various injection strategies with different parameters such as the spray angle, the timing and a single injection or multiple injections were applied. The combustion pressure, the heat release rate and the emissions were measured by a combustion and exhaust emissions analyser system. An injection spray angle of 156° resulted in higher nitrogen oxide emissions than an injection spray angle of 60° did, as the time between the first injection and the second injection increased. Also multiple injections resulted in lower levels of soot and hydrocarbon emissions than a single injection did. A multiple-injection strategy with a dwell time of 20–40° crank angle before top dead centre and the first injection at 60° crank angle before top dead centre or 50° crank angle before top dead centre improved the engine power and lowered the fuel consumption compared with the results for a single injection.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Influence of the fuel spray angle and the injection strategy on the emissions reduction characteristics in a diesel engine


    Beteiligte:
    Kim, Hyung Jun (Autor:in) / Park, Su Han (Autor:in) / Lee, Chang Sik (Autor:in)


    Erscheinungsdatum :

    2015-04-01


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch






    Simulating the effects of fuel injection characteristics on direct injection diesel engine emissions

    Shenghua,L. / Hwang,J.W. / Chae,J.O. et al. | Kraftfahrwesen | 2000


    Modeling the influence of fuel injection parameters on diesel engine emissions

    Mather,D.K. / Reitz,R.D. / Univ.of Wisconsin-Madison,Engine Res.Center,US | Kraftfahrwesen | 1998


    Modelling the Influence of Fuel Injection Parameters on Diesel Engine Emissions

    Mather, D. K. / Reitz, Rolf D. | SAE Technical Papers | 1998