Overheating brakes cause brake fade, tyre blowouts and vehicle fires, but no study has investigated the influence of wheel configuration or rim material on these catastrophic failures. Laboratory measurements of the transient thermal response of heavy vehicle wheel assemblies to 1 kW 4 kW of alpine friction braking are presented; comparing brake and tyre temperature when using dual and single wheels with steel and aluminium rims. Under an averaged braking power of 2 . 5 kW , the final temperature increase of the brake was 5 . 60 ° C (3.7%) higher when using steel versus aluminium rims. The final increase in maximum tyre temperature was 7 . 11 ° C (16%) higher when using aluminium versus steel rims and 25 . 6 ° C (76%) higher when using single versus dual wheels. The greater thermal conductivity and cross-sectional area of the aluminium rims relative to the steel rims reduce the thermal resistance of braking heat flowing into the tyre; leading to higher tyre temperature when using aluminium rims. Dual rims and tyres have larger surface areas than singles which convect more heat to the air at lower temperatures; leading to cooler tyres when using dual wheels. The higher thermal diffusivity of aluminium and lower thermal capacities of single wheels also cause tyre temperature to rise more rapidly than when using steel rims or dual wheels. These results indicate that the risk of tyres overheating (which could lead to blowout) from extended use of the brakes is increased when using single wheels compared to dual wheels and further exacerbated by using aluminium rims compared to steel rims.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Thermal comparison of heavy vehicle wheel assemblies under alpine braking


    Beteiligte:


    Erscheinungsdatum :

    2020-01-01


    Format / Umfang :

    11 pages




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    AUTOMATIC VEHICLE WHEEL BRAKING SYSTEM

    SAJKIN ANDREJ MIKHAJLOVICH / BUZNIKOV SERGEJ EVGENEVICH / ELKIN DMITRIJ SERGEEVICH et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Motorcycle Front Wheel Patter In Heavy Braking

    Sharp,R.S. / Giles,C.G. / Department of Mechanical Engineering,Univ.of Leeds,GB | Kraftfahrwesen | 1984


    Motorcycle Front Wheel Patter in Heavy Braking

    SHARP, R. S. / GILES, C. G. | Taylor & Francis Verlag | 1983


    NONPNEUMATIC VEHICLE WHEEL ASSEMBLIES

    BISHOP IAN / PETRUNK KYLE | Europäisches Patentamt | 2022

    Freier Zugriff

    BRAKING ASSEMBLY FOR A VEHICLE WHEEL

    BOFFELLI ROBERTO / CARVALHO JOSE MANUEL SARAIVA / LUNGHI PAOLO et al. | Europäisches Patentamt | 2024

    Freier Zugriff