A wheel able to measure the generalized forces at the hub of a race motorcycle has been developed and used. The wheel has a very limited mass. It is made from magnesium with a special structure to sense the forces and provide the required level of stiffness. The wheel has been tested both indoor for preliminary approval and on the track.The three forces and the three moments acting at the hub can be measured with a resolution of 1N and 0.3Nm respectively.A specifically programmed DSP (Digital Signal Processor) embedded in the sensor allows real-time acquisition and processing of the six signals of forces/torques components.The signals are sent via Bluetooth to an onboard receiver connected to the vehicle CAN (Controller Area Network) bus. Each signal is sampled at 200Hz.The wheel can be used to derive the actual tyre characteristics or to record the loads acting at the hub.
Race Motorcycle Smart Wheel
Sae International Journal of Passenger Cars. Mechanical Systems
Sae Int. J. Passeng. Cars - Mech. Syst
SAE 2015 World Congress & Exhibition ; 2015
Sae International Journal of Passenger Cars - Mechanical Systems ; 8 , 1 ; 119-127
2015-04-14
9 pages
Aufsatz (Konferenz)
Englisch
Kraftfahrwesen | 2015
|British Library Conference Proceedings | 2015
|