This program involved the detailed evaluation of a novel laser-based in-exhaust ammonia sensor using a diesel fuel-based burner platform integrated with an ammonia injection system. Test matrix included both steady-state modes and transient operation of the burner platform. Steady-state performance evaluation included tests that examined impact of exhaust gas temperature, gas velocity and ammonia levels on sensor response. Furthermore, cross sensitivity of the sensor was examined at different levels of NOX and water vapor. Transient tests included simulation of the FTP test cycles at different ammonia and NOX levels. A Fourier transform infrared (FTIR) spectrometer as well as NIST traceable ammonia gas bottles (introduced into the exhaust stream via a calibrated flow controller) served as references for ammonia measurement. Results suggested that Indrio’s sensor exhibits a strong linear relationship with reference ammonia measurement across the tested range of 0 ppm to 200 ppm with a regression factor (R2) ~ 0.99. Exhaust flowrate did not have a significant impact on sensor performance. With no temperature compensation applied, Indrio’s sensor performance was not impacted by temperatures of the order of 300°C to 400°C, however, it slightly overestimated ammonia levels at lower temperatures (~200°C). Cross-sensitivity experiments indicated that the presence of 200 ppm NOX resulted in less than 2.5% change in slope (Indrio sensor vs reference). Transient sensor response indicated that the sensor tracked reference ammonia concentration reasonably well. Overall, the sensor exhibited tremendous potential to serve as an accurate onboard ammonia sensor that could be used for real-time SCR control strategy optimization which will be invaluable for future low NOX platforms.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluation of Indrio’s Ammonia Sensor using a Diesel Fuel Based Burner Platform


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Balakrishnan, Arun (Autor:in) / Khalek, Imad (Autor:in) / Sur, Ritobrata (Autor:in) / Eakle, Scott (Autor:in) / Premnath, Vinay (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2023



    Erscheinungsdatum :

    2023-04-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Solid Particle Emissions from a Diesel Fuel Based Burner Platform

    Khalek, Imad / Waez, Mir Seliman / Thakral, Nishant et al. | SAE Technical Papers | 2021


    Fuel effects on Diesel odor in a spray burner

    Hsieh,F.T. / Cernansky,N.P. / Savery,C.W. et al. | Kraftfahrwesen | 1980


    Fuel Effects on Diesel Odor in a Spray Burner

    Savery, C. W. / Hsieh, F. T. / Cernansky, N. P. | SAE Technical Papers | 1980


    Dual Fuel Burner

    BRIGGS PAUL | Europäisches Patentamt | 2016

    Freier Zugriff

    Dual fuel burner

    BRIGGS PAUL | Europäisches Patentamt | 2018

    Freier Zugriff