Nickel based superalloys have a wide range of applications due to high mechanical strength at high temperatures, fracture toughness and resistance to corrosion. However, because of their outstanding properties, it is considered as the difficult to machine materials. Inconel alloy X-750 is used extensively in rocket-engine thrust chambers. Airframe applications include thrust reversers and hot-air ducting systems along with large pressure vessels are formed from Inconel alloy X-750. Moreover, the comparative analysis of machinability aspect using coated carbide inserts is reported few. The current study explains the machinability investigation on Inconel alloy X-750 superalloys using coated carbides. To collect the experimental data, the L16 experimental design plan is used to experiment with a machining length of 40 mm. Four level of cutting speed (70,120,170,220 m/min), feed rate (0.1, 0.15, 0.2, 0.25 mm/rev) and cutting depth (0.3, 0.4, 0.5, 0.6 mm) are the cutting/machining parameters used. Cutting Forces, surface roughness, flank and crater wear are considered as target functions. With the application of response surface, coupled with desirability analysis, the optimal levels of the combination are determined. With determined optimal levels, tool life study has been carried out to compare the effectiveness of cutting inserts. Finally, the ranges for best cutting conditions are proposed for serial industrial production.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Comparative Study on Machinability Characteristics in Dry Machining of Inconel X-750 Alloy Using Coated Carbide Inserts


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2018



    Erscheinungsdatum :

    2018-07-09




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Machinability Investigations on Wire Electrical Discharge Machining of Inconel 625 by Taguchi Based Grey Approach

    Sagaya Raj, Gnana / Kotapati, Gowthami / Kiruthika, Jothi et al. | SAE Technical Papers | 2023


    P/M Valve Seat Inserts: Machinability and Mechanical Characterisation

    Filho, E. S. Jesus / Santos, J. C. / Rossi, J. L. et al. | SAE Technical Papers | 2005


    P/M valve seat inserts: machinability and mechanical characterisation

    Filho,E.S. / Salgado,L. / Rossi,J.L. et al. | Kraftfahrwesen | 2005


    P/M Valve Seat Inserts: Machinability and Mechanical Characterisation

    Jesus Filho, E. S. / Salgado, L. / Colosio, M. A. et al. | British Library Conference Proceedings | 2005