In order to take advantage of the machining characteristics of magnesium it is useful to consider recommended tool design and angles. The geometry of the tool can have a large influence on the machining process. Tool geometry can be used to aid with chip flow and clearance, reduce excessive heat generation, reduce tool build up, enable greater feed rates to be employed and improved tool life. This paper presents a new approach for the optimization of Machining parameters on face Milling of ZE41 with multiple responses based on Taughi orthogonal array with VIKOR. Machining tests are carried out 12 mm diameter of insert having 1 flute under dry condition. In this study, Machining parameters namely cutting speed, feed and Depth of Cut and Tool Node radius are optimized with the considerations of multi responses such as surface roughness, Material Removal rate, Tool Wear and Trust Force. A VIKOR grade is obtained from the VIKOR analysis. Based on the VIKOR grade, optimum levels of parameters have been identified and significant contribution of parameters is determined by ANOVA. Confirmation test is conducted to validate the test result. Experimental results have shown that the responses in Machining process can be improved effectively through the VIKOR approach.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Taguchi Based Vikor Method for Optimization of Cutting Parameters for Improving the Efficiency in Machining Process by Considering the Effect of Tool Nose Radius


    Weitere Titelangaben:

    Sae Technical Papers



    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2019



    Erscheinungsdatum :

    2019-10-11




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch






    Thermomechanical modeling of oblique turning in relation to tool-nose radius

    Abdellaoui, Lefi / Bouzid, Wassila | British Library Online Contents | 2016


    Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method

    Abdullah, Ahmad Baharuddin / Jaafar, Noor Azam / Samad, Zahurin | SAE Technical Papers | 2018


    Application of TOPSIS with Taguchi Method for Multi-Attribute Optimization of Machining Parameters in EDM

    Banka, Hemasunder / Bushaboina, Shiva Kumar / Ch, Sridhar Reddy et al. | SAE Technical Papers | 2018