Meeting the increasingly stringent emission and fuel efficiency standards is the primary objective of the modern automotive research. Lean/diluted combustion is a promising avenue to realize high-efficiency combustion and reduce emissions in SI engines. Under diluted conditions, the flame propagation speed is reduced because of the reduced charge reactivity. Enhancing in-cylinder charge motion and turbulence, and thereby increasing the flame speed, is a possible way to harness the combustion process in SI engines. However, charge motion can have a significant effect on the spark ignition process because of the reduced discharge duration and frequent restrikes. A longer discharge duration can aid in the formation of a self-sustained flame kernel and subsequent stable ignition. Therefore, an empirical study is undertaken to investigate the effect of discharge duration and ignition timing on the ignition and early combustion in a port fueled SI engine, operated under lean conditions. Discharge duration is modulated from 1 ms to 8 ms through a continuous discharge strategy. Discharge current and voltage measurements are recorded during the engine operation to characterize the discharge process. In-cylinder charge is diluted using fresh air to achieve lean combustion. In-cylinder pressure measurement and heat release analysis are used to investigate the ignition and combustion characteristics of the engine. Preliminary results indicate that the impact of discharge duration is more pronounced in lean conditions and in the vicinity of the spark advance limit, when ignition process encounters significant challenge. While the discharge duration has a marginal effect on the ignition delay, cyclic variations and stability of the ignition process are notably impacted.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Effect of Spark Discharge Duration and Timing on the Combustion Initiation in a Lean Burn SI Engine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Ting, David (Autor:in) / Zhu, Hua (Autor:in) / Yang, Huimu (Autor:in) / Zheng, Ming (Autor:in) / Sandhu, Navjot Singh (Autor:in) / Leblanc, Simon (Autor:in) / Yu, Xiao (Autor:in)

    Kongress:

    SAE WCX Digital Summit ; 2021



    Erscheinungsdatum :

    2021-04-06




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Combustion chamber design for a lean-burn spark ignition engine

    Evans,R.L. / Univ.of British Columbia,CA | Kraftfahrwesen | 1992


    Combustion optimization of a hydrogen-enhanced lean-burn spark ignition engine

    Goldwitz,J.A. / Heywood,J.B. / Massachusetts Inst.of Technology,Cambridge,US | Kraftfahrwesen | 2005


    Lean burn versus EGR spark ignition engine

    Hacohen,J. / Ashcroft,S.J. / Belmont,M.R. et al. | Kraftfahrwesen | 1995


    Ignitability and Combustion Characteristics of the Multi Spark Capacitor Discharge Ignitor for a Lean Burn Engine

    Lee, Jong Tai / Choi, Kyu Hoon / Lee, Sang Joon et al. | SAE Technical Papers | 1995


    Combustion characterization of natural gas in a lean burn spark-ignition engine

    Rousseau, S / Lemoult, B / Tazerout, M | SAGE Publications | 1999