The implementation of enablers on a luxury sport utility vehicle is used to illustrate the development process for reduction of road noise. The vehicle in this case study was launched into production with two tuned mass dampers for reduction of low frequency road noise content which was amplified by frame modes. Additionally, resonators were integrated into the wheels (rims) to address the dominant cavity resonance frequencies. The results of this successful production implementation are illustrated herein.An RNC (road noise cancellation) system was integrated into the case vehicle to assess its performance relative to the passive enablers listed above. This production representative (embedded software solution) RNC system utilized the vehicle’s existing audio system for creation of active noise to cancel noise content which was predicted using accelerometers mounted to the vehicle chassis.A comparison of in-vehicle noise indicated a significant reduction at low frequencies (at all seating locations) when utilizing the active noise control solution. These noise improvements are coupled with a vehicle mass reduction of greater than 4 kg, when compared to the passive enabler solution.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Case Study Comparing Active vs. Passive Enablers for Vehicle Interior Noise Reduction


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Walt, Adam (Autor:in) / McCain, Dan (Autor:in) / Trumpy, David (Autor:in) / Kim, Geon-Seok (Autor:in) / Magnuson, Levi (Autor:in) / Wickman, Matthew (Autor:in) / Tousignant, Todd (Autor:in)

    Kongress:

    Noise and Vibration Conference & Exhibition ; 2023



    Erscheinungsdatum :

    2023-05-08




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Glazing for Vehicle Interior Noise Reduction

    Freeman, Glenn E. / Esposito, Robert A. | SAE Technical Papers | 2002


    Glazing for vehicle interior noise reduction

    Esposito,R.A. / Freeman,G.E. / Solutia,US et al. | Kraftfahrwesen | 2002


    Recent Developments in Vehicle Interior Noise Reduction

    Asai,M. / Fujii,Y. / Toyota Motor,JP | Kraftfahrwesen | 1982


    Recent Developments in Vehicle Interior Noise Reduction

    Asai, Makoto / Fujii, Yuichi | SAE Technical Papers | 1982


    Vehicle noise path modelling for interior noise variability reduction

    Cornish, R. / Syred, F. / Institution of Mechanical Engineers; Automotive Division | British Library Conference Proceedings | 1997