The woofer in a car should be large to cover the low frequencies, so it is heavy and needs an ample space to be installed in a passenger car. The geometry of the woofer should conform to the limited available space and layout in general. In many cases, the passengers feel that the low-frequency contents are not satisfactory although the speaker specification covers the low frequencies. In this work, a thin panel is installed between the roof liner and the roof panel, and it is used as the woofer. The vibration field is controlled by many small actuators to create the speaker and baffle zones to avoid the sound distortion due to the modal interaction. The generation of speaker and baffle zones follows the inverse vibro-acoustic rendering technique. In the actual implementation, a thin acrylic plate of 0.53x0.2 m2 is used as the radiator panel, and the control actuator array is composed of 16 moving-coil actuators. The shape of the desired speaker zone is an ellipse, and the required amplitude of this piston source is pre-calculated to satisfy the desired sound radiation at the ear position. The gain of the actuator array to properly generate the desired vibration field is obtained by solving an inverse problem constructed by the transfer mobility between each actuator and field point on the plate. For the recruitment of the low-frequency deficiency of human auditory characteristics, the desired sound spectrum is set to follow the equal-loudness contour of 40 phons. It is confirmed that the woofer in a car can be replaced by the developed panel speaker.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Reinforcement of Low-Frequency Sound by Using a Panel Speaker Attached to the Roof Panel of a Passenger Car


    Weitere Titelangaben:

    Sae Int. J. Adv. and Curr. Prac. in Mobility


    Beteiligte:
    Ih, Jeong-Guon (Autor:in) / Lee, Ki-Ho (Autor:in) / Cho, Munhwan (Autor:in)

    Kongress:

    11th International Styrian Noise, Vibration & Harshness Congress: The European Automotive Noise Conference ; 2020



    Erscheinungsdatum :

    2020-09-30


    Format / Umfang :

    7 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Roof panel reinforcement

    NANIA ADRIAN / LEE MICHAEL JOSEPH | Europäisches Patentamt | 2018

    Freier Zugriff

    ROOF PANEL ANTI-FLUTTER REINFORCEMENT

    DONABEDIAN EDGAR EDWARD / WAGNER DARRIN NEIL | Europäisches Patentamt | 2020

    Freier Zugriff

    Expandable roof panel perimeter reinforcement

    DONABEDIAN EDGAR EDWARD / WAGNER DARRIN NEIL / KELLER MARK et al. | Europäisches Patentamt | 2016

    Freier Zugriff

    EXPANDABLE ROOF PANEL PERIMETER REINFORCEMENT

    DONABEDIAN EDGAR EDWARD | Europäisches Patentamt | 2015

    Freier Zugriff

    Roof panel anti-flutter reinforcement

    DONABEDIAN EDGAR EDWARD / WAGNER DARRIN NEIL | Europäisches Patentamt | 2021

    Freier Zugriff