For lean burn spark-ignition (SI) engines, it is difficult to meet future NOx emission limits. A promising approach is the use of NOx-traps, which suffer fast aging above 750°C to 800°C. In addition, NOx-traps have a maximum working temperature of about 550°C. Therefore, under high load efficient cooling is necessary. On the other hand, light-off has to be fast, and heat loss under low load has to be minimized.For the thermal protection of NOx-traps, air cooling is more efficient than water cooling because water cooling demands an increase in the size of the radiator. An efficient low-cost cooler, which is made up of only three parts (identical top- and bottom shell and a perforated central sheet) was developed. The perforation in the central sheet leads to a high heat transfer from the exhaust gas to this sheet by destroying the laminar boundary layer which is always formed along surfaces. The heat transfer from the central sheet to the casing by radiation is a simple means of establishing a temperature dependence for the cooling process. Other techniques for temperature dependent cooling (for example shutters or valves for control of the gas flows) were investigated as well. The cooler was optimized by testing surfaces with different emissivities and different geometries of the perforation in the central sheet.It is suggested that in the future more efficient exhaust coolers will be used, which allow a faster light-off and therefore a reduction in the size of the NOx-trap.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Exhaust Cooling for NOx-Traps for Lean Spark-Ignition Engines


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Damson, B. (Autor:in)

    Kongress:

    SAE 2002 World Congress & Exhibition ; 2002



    Erscheinungsdatum :

    2002-03-04




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Exhaust cooling for NOx-traps for lean spark-ignition engines

    Damson,B. / Eberspaecher,Esslingen,DE | Kraftfahrwesen | 2002


    2002-01-0737 Exhaust Cooling for NO~x-Traps for Lean Spark-Ignition Engines

    Damson, B. / Society of Automotive Engineers | British Library Conference Proceedings | 2002


    Ignition, Combustion, and Exhaust Emissions of Lean Mixtures in Automotive Spark Ignition Engines

    Kawasaki, Hajime / Sasaki, Kenichi / Tanuma, Takeshi et al. | SAE Technical Papers | 1971


    Boosted Current Spark Strategy for Lean Burn Spark Ignition Engines

    Ting, David / Li, Liguang / Zheng, Ming et al. | SAE Technical Papers | 2018


    Lean Mixture Operation of Hydrogen-Fueled Spark Ignition Engines

    Keffer, James F. / Wallace, James S. / Segal, Liviu | SAE Technical Papers | 1985