Emissions from motor vehicles are generally recognized to pollute the outside air, with negative effects on human health and the environment. Little is known about the extent to which these pollutants enter the interior of the vehicles through their ventilation systems. The cabin air quality inside vehicles is very lightly regulated around the world, and there is no recognized standard method for measuring pollution ingress. This article tests the effectiveness of a method originally proposed in an SAE paper in 2019 for characterizing the degree of particle ingress. This cabin air quality index is hypothesized to give a repeatable, characteristic value for the vehicle to reduce in-cabin pollutant concentration compared to outside pollutant concentration, which may be suitable for inter-vehicle comparison. To test the method, a series of real-world on-road tests were conducted in Germany with three different types of measurement equipment, two different drivers, and two different routes, with a view to quantifying the repeatability and reproducibility of measurements. The methodology used was based on a draft test protocol being developed by the standardization organization, the Comité Européen de Normalisation (CEN), and its Workshop 103. The results showed strong levels of repeatability and reproducibility regardless of the route and the driver. The cabin air quality indices were different between different particle metrics, reflecting size-dependent filtration efficiency and different mode diameter for different metrics for the same particle size distribution, but there was high consistency within measurements from the device measuring the same metric. The conclusion is that the method proposed in 2019 is a suitable method for deriving characteristic cabin air quality values for vehicles, which could then be used for comparison or regulation.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Evaluating Repeatability and Reproducibility of CEN Workshop Real Driving Cabin Air Quality Testing Method


    Weitere Titelangaben:

    Sae Int. J. Commer. Veh


    Beteiligte:
    Hemming, Carl (Autor:in) / Jung, Heejung (Autor:in) / Holland, James (Autor:in) / Molden, Nick (Autor:in)

    Erschienen in:

    Erscheinungsdatum :

    2022-06-06


    Format / Umfang :

    19 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Some Repeatability and Reproducibility Issues in Real Driving Emission Tests

    Giovinazzi, Mattia / Donateo, Teresa | SAE Technical Papers | 2018


    Statistical Considerations for Evaluating Biofidelity, Repeatability, and Reproducibility of ATDs

    Nusholtz, Guy S. / Prado, Jesús A. / Di Domenico, Laura et al. | SAE Technical Papers | 2013


    Repeatability and Reproducibility of Manual Pavement Distress Survey Methods

    Livneh, M. / Transportation Research Board | British Library Conference Proceedings | 1994


    Ultrasonic thickness gauges - an analysis of repeatability and reproducibility

    Deis,B.R. / Allen,D.R. / Armco Steel,Technical Resources Dep.,US | Kraftfahrwesen | 1990


    Brake Emission Testing Process – Assuring Repeatability and Reproducibility of Emission Measurement Results

    Rainer, Andreas / Wanek-Ruediger, Christian / Weidinger, Christoph et al. | SAE Technical Papers | 2023