The internal combustion engines require an efficient cooling system, the high temperatures generates at the time of combustion, reaching 2500 K peak burned gas. The materials used in the construction of the cylinder must operate within a maximum value, as well as the fluid film of lubricant oil. A bad dimensioned cooling system can lead to serious consequences such as loss of engine performance and/or efficiency, pre-ignition and increased exhaust emissions and may even lead to the destruction of the engine. In the torch ignition system overheating of the pre-chamber is even more critical and may lead to significant losses. Thus the torch ignition system requires an efficient cooling to prevent deterioration of the pre-chamber and consequently the engine caused by overheating. The solution proposed to resolve this inconvenience is the use of the cooling gallery in the cylinder head, for cooling the pre-chamber that is selected. For this cooling system using gallery of water around the pre-chamber, a computational model is proposed using the energy balance and three-dimensional heat conduction in steady state and transient. For the numerical modeling of the pre-chamber system is used the commercial ANSYS FLUENT software. The numerical results were analyzed and used for the improvement of the proposed cooling system. From the results of the numerical model, the prototype was designed and assembled in a commercial engine which was tested on dynamometer bench, generating satisfactory results


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Numerical Analysis of Cooling Process of an Torch Ignition System


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    TEIXEIRA, A. F. (Autor:in) / DIAS, E. C. (Autor:in) / RODRIGUES FILHO, F. A. (Autor:in) / BARROS, J. E. M. (Autor:in) / VALLE, R. M. (Autor:in) / MOREIRA, T. A. A. (Autor:in)

    Kongress:

    23rd SAE Brasil International Congress and Display ; 2014



    Erscheinungsdatum :

    2014-09-30




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    TORCH IGNITION SYSTEM ANALYSIS IN AN SPARK IGNITION ENGINE

    Pujatti, Fabrício José Pacheco / Pereira, José Pedro / Gomes, José Renato Carvalho et al. | SAE Technical Papers | 2005


    Hydrogen/Air-Ignition Torch

    Repas, George A. | NTRS | 1988


    Stratified Torch Ignition Engine: Combustion Analysis

    Teixeira, Alysson Fernandes / Filho, Fernando Antonio Rodrigues / Baêta, José Guilherme Coelho et al. | SAE Technical Papers | 2016


    Stratified Torch Ignition Engine: Performance Analysis

    Teixeira, Alysson Fernandes / Filho, Fernando Antonio Rodrigues / Baêta, José Guilherme Coelho et al. | SAE Technical Papers | 2016


    Supersonic Flow Ignition by Plasma Torch and H2-O2 Torch

    Kobayashi, K. | Online Contents | 2004