The EMI, electromagnetic interference, is tested for automobiles and components by the method defined in the international standard, CISPR 25. Regarding the automobile test, the EMI from the component installed in the automobile is measured by the antenna of an automobile. On the other hand on the component test, the EMI from the component is measured by a mono-pole antenna set forward of the component. However, components sometimes fail the automobile test even if its passed the component test due to the difference of the method. In this case, the component has to be designed again to pass the automobile test. Therefore, the prediction method of the automobile test result is required. In this paper, we tried to modify the standard component test configuration to predict the automobile test result for a fuel pump system in AM frequency band. At first, to show the noise propagation mechanism of the automobile test, the mechanism was modeled by an electrical circuit by focusing on the parasitic capacitances between the fuel pump system, the antenna and the chassis. Next, to realize the same electrical circuit as the automobile, the standard component test configuration was modified. For example, in the standard component test, the fuel pump should be set on the grounded ground plane. On the other hand, in the modified component test, the fuel pump was set between the floor and floating ground plane. As the result, the modified component test result agreed with the automobile test result, meaning automobile test result could be predicted.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Prediction Method for Automobile EMI Test Result in AM Frequency Band


    Weitere Titelangaben:

    Sae International Journal of Passenger Cars- Electronic and Electrical Systems
    Sae Int. J. Passeng. Cars – Electron. Electr. Syst


    Beteiligte:
    Kawai, Kazuma (Autor:in) / Nomura, Takashi (Autor:in)

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017



    Erscheinungsdatum :

    2017-03-28


    Format / Umfang :

    8 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Prediction Method for Automobile EMI Test Result in AM Frequency Band

    Nomura, Takashi / Kawai, Kazuma | British Library Conference Proceedings | 2017


    Aluminium structural castings result in automobile weight reduction

    Hatch, D.E. / Jorstad, J.L. | Tema Archiv | 1978


    Aluminium Structural Castings Result in Automobile Weight Reduction

    Hatch,D.E. / Jorstad,J.L. / Reynolds Metals,US | Kraftfahrwesen | 1978


    Aluminum Structural Castings Result in Automobile Weight Reduction

    Hatch, David E. / Jorstad, John L. | SAE Technical Papers | 1978


    ESTIMATION METHOD OF TIRE TEST RESULT

    TAKAHASHI HISAFUMI | Europäisches Patentamt | 2020

    Freier Zugriff