This paper describes the measurement of in-cylinder engine friction using the instantaneous IMEP method. This method has been applied to measure in-cylinder friction force in a modern, low friction design production spark ignited engine. An improved mechanical telemetry system has been developed to implement this method. The telemetry system continues to provide excellent data even after 50+ hours of operation at speeds as high as 2000 rpm.Investigated in this study were the primary sources of error associated with this technique. Also presented are the steps taken to minimize the effects of these errors. The refined technique has been subsequently used to obtain piston assembly friction data for both motoring and a limited number of firing cases. The effects of design parameters and operating conditions were investigated. In addition, crank-angle resolved and cycle-integrated results, converted to in-cylinder FMEP, were compared and the trends obtained were consistent with the Stribeck curve. The ratio of in-cylinder to total engine FMEP ranged from 19-45% in the tests performed in this study.This technique was also used to obtain “cold-start” in-cylinder friction data, which in turn were used to calculate an oil viscosity correction coefficient. This coefficient was implemented in an engine friction model for prediction of motoring and firing friction at different operating temperatures.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    An Investigation in Measuring Crank Angle Resolved In-Cylinder Engine Friction Using Instantaneous IMEP Method


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    Powertrain & Fluid Systems Conference and Exhibition ; 2007



    Erscheinungsdatum :

    2007-10-29




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :



    Measurement of Piston and Ring Assembly Friction Instantaneous IMEP Method

    Uras,H.M. / Patterson,D.J. / Univ.of Michigan,Ann Arbor,US | Kraftfahrwesen | 1983


    A Model for Crank-Angle-Resolved Engine Cylinder Pressure Estimation

    Jacoby, Andres / Sangeorzan, Brian / Llamocca, Daniel et al. | SAE Technical Papers | 2018


    Measurement of Piston and Ring Assembly Friction Instantaneous IMEP Method

    Patterson, Donald J. / Uras, H. Mehmet | SAE Technical Papers | 1983


    The Caterpillar imep Meter and Engine Friction

    Brown, William L. | SAE Technical Papers | 1973