Elimination of oil from the hot section of the engine, very low running losses and potential cost reductions are incentives to develop air bearings for the high speed rotors of automotive gas turbines. Low air bearing stiffness, start-stop wear and high starting torque are design challenges in this application.This paper outlines analytical and experimental programs undertaken by the Power Systems Department of the General Motors Research Laboratories to evaluate air bearing usage in vehicular gas turbines. Air bearing operation has been demonstrated in engine dynamometer tests. A better understanding of the many factors which affect the performance of cantilevered-leaf air bearings has been realized through extensive rotor dynamics rig testing coupled with development of bearing analysis computer programs. Measured running losses of the air bearing are much lower than those of the oil jet lubricated ball bearing it is replacing. Increasing leaf thickness, leaf-housing attachment angle, leaf free radius and eliminating the clearance between the leaf beam and housing slot increased the bearing stiffness.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Air Bearing Development for a GM Automotive Gas Turbine


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    1979 Automotive Engineering Congress and Exposition ; 1979



    Erscheinungsdatum :

    1979-02-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :


    Air bearing development for a GM automotive gas turbine

    Trippet,R.J. / General Motors,US | Kraftfahrwesen | 1979


    Automotive gas turbine heat exchanger development

    Day,J.P. / Corning,US | Kraftfahrwesen | 1996


    AGT101 automotive gas turbine system development

    RACKLEY, R. / KIDWELL, J. | AIAA | 1982


    Automotive Gas Turbine Heat Exchanger Development

    Day, J. Paul | SAE Technical Papers | 1996


    Turbine Rankine Cycle Automotive Engine Development

    Collamore, F. N. / Hodgson, J. N. | SAE Technical Papers | 1974