The FE modeling guidelines and the design master S-N curve for weld root failure was recently proposed using the mesh-insensitive structural stress method. Due to increasing demands to validate the design master S-N curve, various weld root fatigue failure cases were reanalyzed based on well-documented weld root fatigue failure studies including different weld shapes and sizes, plate thickness combinations, and loading modes. Also, the validations of the master S-N curve for weld root failure were conducted using a well-documented structural joint fatigue data set as well as additional fatigue test results.Through the analyses, the proposed weld root failure modeling guidelines and the structural stress-based master S-N curve approach were confirmed to be good to use for practical applications to predict weld root failure.The critical weld size using the ratio of weld size and plate thickness for load carrying cruciform joints under tensile loading was re-evaluated. The structural stress method based critical crack size demonstrated the predictability of the failure mode (i.e., either toe failure or root failure) based on the relationship between weld size and plate thickness.It was observed that the level of residual stresses at the weld root region are drastically affected by the gap distance or the penetration depth. Therefore, the combined effects of the levels of residual stresses and applied loading affect the fatigue behavior.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Re-Evaluation of Fatigue Evaluation Procedures for Weld Root Failure


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    WCX SAE World Congress Experience ; 2019



    Erscheinungsdatum :

    2019-04-02




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Development of Practical Fatigue Strength Evaluation Method for Weld Root Crack

    Ashida, Shinsaku / Sugimoto, Tomohiro / Ishibashi, Kinya et al. | TIBKAT | 2021


    Development of Practical Fatigue Strength Evaluation Method for Weld Root Crack

    Ashida, Shinsaku / Sugimoto, Tomohiro / Ishibashi, Kinya et al. | Springer Verlag | 2020


    Fatigue Strength Evaluation of Spot Weld with Gap between Steel Sheets

    Uchiya, T. / Tanizaki, S. / Uchihara, M. et al. | British Library Conference Proceedings | 2010


    SPOT WELD FATIGUE DURABILITY PERFORMANCE EVALUATION THROUGH THE USE OF FEA

    Vilela, Daniel / Stocco, Danilo / Batalha, Gilmar F. | SAE Technical Papers | 2009


    Weld fatigue technology

    Emerald Group Publishing | 2006