IC (Internal Combustion) engines are evolved and refined over time to greater levels of technology in terms of emission, performance, NVH (Noise, Vibration & Harshness), and design philosophy. Crank-train generates a greater impact on NVH optimization due to its geometry and dynamics. Hence, more attention to mass balancing is required to minimize the negative impact on NVH.The present work demonstrates the evaluation of balancing rate of crank-train system from the first principle of couple balancing. Calculations are conducted at the concept stage to estimate an internal rotating couple balancing of crank-train system due to counterweights and rotating masses. As crankshaft weighs approximately 10-12% weight of an engine and its counter weight plays a vital role in balancing, its optimization will result in a significant impact on NVH. Therefore, based on balancing rate, engines’ crankshaft was optimized and to validate the methodologies, forces on engine mount and main bearings were evaluated for both the base and optimized engine.Conventionally, CAE analysis needs to be conducted at each iteration of optimization to evaluate the balancing of the system. However, using the mentioned approach, estimating balancing at a preliminary stage of design optimization proves to be effective in time-saving too. Forces on the crankcase and engine mounting arm evaluated as these are exciting forces for in cab NVH.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Crank-Train System Balancing and Crankshaft Optimization in Different Outlook


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Mishra, Pragya (Autor:in) / Ghotekar, Sunil (Autor:in) / Kolhe, Vivek M (Autor:in)

    Kongress:

    Symposium on International Automotive Technology ; 2024



    Erscheinungsdatum :

    2024-01-16




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    CRANKSHAFT ASSEMBLY WITH POLYGON CRANK PIN

    MINTON DAVID MICHAEL | Europäisches Patentamt | 2016

    Freier Zugriff

    Digital Approach for Dynamic Balancing of Three Cylinder Gasoline Engine Crank-Train

    Gupta, Akash K / Panwar, Anupam / Joshi, Manoj et al. | SAE Technical Papers | 2021


    Digital Approach for Dynamic Balancing of Three Cylinder Gasoline Engine Crank-Train

    Gupta, Akash K / B, Venkatakiran / K, Rahul et al. | British Library Conference Proceedings | 2021


    Balancing Optimization of a Motorcycle Engine Crankshaft for Vibration Reduction

    Ganguly, Arnab / Bhatia, Niket / Mohite, Ulhas et al. | SAE Technical Papers | 2016


    The Effects of Crank Ratio and Crankshaft Offset on Piston Friction Losses

    Takiguchi, Masaaki / Wakabayashi, Ryo / Yamauchi, Takahiro et al. | SAE Technical Papers | 2003