As part of the joint government/industry Partnership for a New Generation Vehicle (PNGV), Ford Motor Company, with the support of Alcan Aluminum Corporation and The Budd Company, conducted a feasibility study of the design and high volume manufacturing of a lightweight aluminum sport utility vehicle frame. The specific objective of the study was to assess the capability of an aluminum frame to achieve equivalent performance to the 2002 Ford Explorer frame, but at a 40% weight reduction.Using Finite Element Analysis (FEA), it was determined that if a design was constrained to the same section size as the production steel frame, the maximum weight savings that can be realized by use of aluminum is approximately 20%. However, if the side rail sections between the front and rear suspension points can be modestly increased, the aluminum frame can match the production steel frame in static bending and torsional stiffness and have greater normal mode frequencies than the production steel frame. In addition, this allows for an approximate 40% reduction in weight compared to the production steel frame.Preliminary analysis also indicates an aluminum frame with the gage required to achieve the desired stiffness needed for ride, handling and NVH (noise, vibration and harshness) will probably have excellent energy absorption during frontal impacts.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Design Concept for an Aluminum Sport Utility Vehicle Frame


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE 2003 World Congress & Exhibition ; 2003



    Erscheinungsdatum :

    2003-03-03




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    2003-01-0572 A Design Concept for an Aluminum Sport Utility Vehicle Frame

    Danyo, M. W. / Young, C. S. / Cornille, H. J. et al. | British Library Conference Proceedings | 2003


    A design concept for an aluminium sport utility vehicle frame

    Danyo,M.W. / Young,C.S. / Cornille,H.J. et al. | Kraftfahrwesen | 2003


    Special aluminum alloy rear auxiliary frame for electric sport utility vehicle (SUV)

    ZHANG YUJIANG / WANG MINGBO / LAN LEI et al. | Europäisches Patentamt | 2022

    Freier Zugriff

    Front-End Structural Crash Energy Management Concept for a Sport Utility Like Aluminum Vehicle

    Baccouche, M. R. / Wagner, D. A. / Chen, X. et al. | British Library Conference Proceedings | 2001


    SPORT UTILITY VEHICLE ENCLOSURE

    TRUJILLO ADAM L | Europäisches Patentamt | 2021

    Freier Zugriff