In order to understand the spray impinging the lubricant oil on the piston or cylinder wall in GDI engine, the Laser Induced Fluorescence (LIF) method was used to observe the phenomenon of the fuel droplets impact oil film and distinguish the fuel and oil during the impingement. The experimental results show that the hydrodynamic characteristics of impingement affected by the oil viscosity, droplets’ Weber number, oil film thickness. Crown formed after impingement. The morphology after impingement was categorized into: rings, stable crown, splash and prompt splash. Low oil film dynamic viscosity, high Weber number or thin oil film can facilitate splash. Splash droplets consist of fuel and oil, and the oil is the main component of splash droplets and crown. The empirical formula of critical We number (We) is fitted. High dimensionless oil film thickness or low oil film dynamic viscosity can increase the proportion of fuel in the crown.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Study on Hydrodynamic Characteristics of Fuel Droplet Impact on Oil Film


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Qin, Jing (Autor:in) / Lu, Lili (Autor:in) / Li, Xiang (Autor:in) / Pei, Yiqiang (Autor:in) / Wang, Yuqian (Autor:in) / Peng, Zhenshan (Autor:in)

    Kongress:

    WCX SAE World Congress Experience ; 2020



    Erscheinungsdatum :

    2020-04-14




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Characteristics of Single Fuel Droplet Impact on Oil Film

    Lu, Lili / Zhu, Qingyang / Pei, Yiqiang et al. | SAE Technical Papers | 2019




    Transient characteristics of fuel atomization and droplet size distribution in Diesel fuel spray

    Takeuchi,K. / Senda,J. / Shikuya,M. et al. | Kraftfahrwesen | 1983


    Transient Characteristics of Fuel Atomization and Droplet Size Distribution in Diesel Fuel Spray

    Senda, Jiro / Takeuchi, Kiichiro / Shikuya, Masayuki | SAE Technical Papers | 1983