Fiber-reinforced polymer composites propose exceptional directional mechanical properties, and combining their advantages with the potential of 3D printing has resulted in many novel research fronts. Industries have started using 3D printed components which are rapidly replacing conventional material components in most of the industries. Carbon fiber reinforced Polylactic Acid (PLA) often finds its application in reasonably high loading conditions working at lesser speed like lightweight gears, spanners, nuts, and bolts. Wear reduction is an important factor that plays an important role in prolonging the component's life. Hence, it is crucial to optimize 3D printing parameters to get desired strength according to the application. The aim of this paper is to conduct the wear rate test on the Fused Deposition Modelled (FDM) printed carbon fiber reinforced PLA parts, to identify the optimum printing parameters which are crucial for wear reduction. Two process parameters i.e. fill density and part orientations are selected that are found to have a significant influence on the wear rate of the CRF PLA parts. The specimens are printed in both vertical and horizontal orientation with a 20% increase in fill density for the wear rate experiments. The wear rate tests are carried out using a “pin on disc tribometer” for precise analysis at a controlled speed and loading conditions. The potential of this research work lies in the investigation of the tribological characteristic of 3D printed CRF PLA parts for improving the wear performances.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Investigations on the Wear Rate Properties on 3D Printed Carbon Fiber Reinforced PLA


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Naiju, CD (Autor:in) / Raja, Kumar (Autor:in) / Dessalegn, Naol (Autor:in) / M, Senthil Kumar (Autor:in)

    Kongress:

    International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ; 2021



    Erscheinungsdatum :

    2021-10-01




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Wear properties of glass fiber reinforced polypropylene

    Yetistiren,H. / Zeren,A. / Sahin,T. et al. | Kraftfahrwesen | 2012


    High-Rate Fabrication Methods for Carbon Fiber-Reinforced Composites

    Fanter, D. L. / Strandburg, D. B. / Dry, A. C. et al. | British Library Conference Proceedings | 1996


    Ablation Performance of 3D Printed Continuous Carbon Fiber-Reinforced PEEK

    Wu, Hao / Kim, Steven D. / Yee, Colin M. et al. | AIAA | 2021


    3D Printed Carbon Fiber Reinforced Polymeric Composites in Tension

    Curtis, Peyton / Frankowski, Andrew / Tan, Kwek Tze | AIAA | 2024


    Wear Properties of Particulate Reinforced Aluminum Alloys

    Cho, Y.-G. / Kim, S.-Y. / Park, I. et al. | British Library Conference Proceedings | 1997