In commercial vehicles, exhaust system is normally mounted on frame side members (FSM) using hanger brackets. These exhaust system hanger brackets are tested either as part of full vehicle durability testing or as a subsystem in a rig testing. During initial phases of product development cycle, the hanger brackets are validated for their durability in rig level testing using time domain signals acquired from mule vehicle. These signals are then used in uni-axial, bi-axial or tri-axial rig facilities based on their severity and the availability of test rigs. This paper depicts the simulation method employed to replicate the bi-directional rig testing through modal transient analysis. Finite Element Method (FEM) is applied for numerical analysis of exhaust system assembly using MSC/Nastran software with the inclusion of rubber isolator modeling, meshing guidelines etc. Finite Element Analysis (FEA) results are in good agreement with rig level test results. This paper also explains a method for identifying root cause for high stresses in critical locations and predominant mode causing failures using FEA. Effective design modifications can be done if root cause is clearly identified. Also, the type of test-rig to be used during physical testing can be identified using this procedure.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Transient Fatigue Analysis of Exhaust System Mounting Brackets for Commercial Vehicle - Correlation


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Sujatha, C. (Autor:in) / K., Chinnaraj (Autor:in) / P, Sasikumar (Autor:in)

    Kongress:

    WCX™ 17: SAE World Congress Experience ; 2017



    Erscheinungsdatum :

    2017-03-28




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Transient Fatigue Analysis of Exhaust System Mounting Brackets for Commercial Vehicle - Correlation

    Sasikumar, P. / Sujatha, C. / Chinnaraj, K. | British Library Conference Proceedings | 2017


    Mounting brackets for a vehicle traction battery system

    KHAN AHTERAM / SABBAGH AFIF / SHEN JINGMEI et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Equipment rack having mounting brackets

    JOST HENRY D / LATINO RICHARD M / SANDOVAL LORENA E et al. | Europäisches Patentamt | 2020

    Freier Zugriff

    Battery array mounting and supporting brackets

    LEAL RODRIGUEZ JUAN CARLOS / DAS SUMA RANI | Europäisches Patentamt | 2021

    Freier Zugriff

    MOUNTING BRACKETS FOR AUXILIARY SUSPENSION SYSTEMS

    JACOBSMA DALE E / VAN DEN BRINK JOEL D / WETTER MICHAEL S | Europäisches Patentamt | 2019

    Freier Zugriff