This paper presents the implementation of an optimal design methodology to design a heat recovery system (HRS) based on an Organic Rankine Cycle (ORC). The optimal design sought to simultaneously minimize the total volume of the system and maximize the power recovered. As a result of the application of the methodology, a family of optimal solutions with different dimensions and capacities was obtained.The implemented methodology was composed of three interacting modules. The first module corresponds to a parametric model that estimates the response of the system. The second module corresponds to a co-simulation scheme that exchanges data between the other two modules. The third module corresponds to an optimization strategy that explores the design space and finds the optimal solutions.The optimal design methodology was implemented in a case study. The case study was an HRS used to recover energy from the exhaust gases of a small car. Given the case study conditions, the optimization model was set up to find small-volume solutions with the highest recover-power. As a result, a family of optimal solutions was obtained. That allows the designer to select the preferred solution from a range of sizes and performances that already consider the tradeoff between the variables. In addition, as the whole procedure is parametric, the designer can recalculate the solutions to consider a different case. As a result of the application of the methodology in the case study, a family with a volume range between 0.0139 m3 and 0.074 m3 was obtained. This family can recover between 331 W and 1835 W, depending on the final solution selection.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Optimal Design of a Heat Recovery System Based on an Organic Rankine Cycle


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    SAE WCX Digital Summit ; 2021



    Erscheinungsdatum :

    2021-04-06




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Waste heat recovery: low temperature heat recovery using the Organic-Rankine-Cycle

    Koerner,J.E. / Kobs,T. / Bargende,M. et al. | Kraftfahrwesen | 2013


    Development status:Binary Rankine cycle waste heat recovery system

    Rhinehart,H.L. / Ketler.C.P. / Rose,R.K. et al. | Kraftfahrwesen | 1977


    Integrated waste heat recovery system with Rankine cycle

    Smague,P. / Leduc,P. / Inst.Francais du Petrole,FR | Kraftfahrwesen | 2013



    DIPS Organic Rankine Cycle Heat Rejection System

    Pearson, Richard | SAE Technical Papers | 1987