Experimental measurements and numerical computations were made to characterize a spray generated by a high-pressure swirl injector. The Phase Doppler technique was applied to get information on droplet sizes (d10) and axial velocities at defined distances from the injector tip. Global spray visualization was also made.Computations were carried out using a modified version of KIVA 3V. In particular, the break-up length of the sheet and its dimension were computed from a semi-empirical correlation related to the wave instability theory suggested by Dombrowski, including the modifications introduced by Han and Reitz.Two different approaches were used to describe the initial spray conditions. According to the first, discrete particles with a characteristic size equal to the thickness of the sheet are injected. The second approach assumes, that the particles having a SMD computed by a semi-empirical correlation are injected according to a statistical distribution.In both cases droplet break-up occurs when the traveling distance becomes greater than the sheet break up length. In addition, in both cases, the secondary break up is based on the TAB model.A simple model based on mass and momentum conservation has been set up to calculate the sheet thickness at nozzle exit and to describe the evolution of axial and tangential components of motion at the start of injection.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Experimental and Numerical Study of Spray Generated by a High Pressure Gasoline Swirl Injector


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Police, G. (Autor:in) / Valentino, G. (Autor:in) / Auriemma, M. (Autor:in) / Pontoppidan, M. (Autor:in) / Diana, S. (Autor:in)

    Kongress:

    SAE Powertrain & Fluid Systems Conference & Exhibition ; 2002



    Erscheinungsdatum :

    2002-10-21




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Experimental and numerical study of spray generated by a high pressure gasoline swirl injector

    Auriemma,M. / Diana,S. / Police,G. et al. | Kraftfahrwesen | 2002


    The fuel spray structure of high pressure direct swirl injector for gasoline injection system

    Kang,K.K. / Cho,H.S. / Baik,S.K. et al. | Kraftfahrwesen | 2004



    The Fuel Spray Structure of High Pressure Direct Swirl Injector for Gasoline Injection System

    Cho, Han Seong / Bae, Jae Il / Kang, Kyeong Kyun et al. | SAE Technical Papers | 2004


    Geometrical effects flow characteristics of a gasoline high pressure swirl injector

    Ren,W.M. / Shen,J. / Nally,J.F. et al. | Kraftfahrwesen | 1997