To reduce diesel engine emissions, a split injection strategy with PHCCI combustion in a diesel engine was investigated with simulation. A multidimensional CFD application, Star-CD coupled with a modified 2-D flamelet was used to simulate multiple injection combustion. Several mass ratios of the first injection and second injection conditions compared to the conventional pilot and main injection strategy were evaluated. The injection angle and the injection timing of the first injection were fixed to 150° and 55° BTDC, respectively. Because of the early injection, the in-cylinder pressure and temperature were much lower than those of normal injection conditions, and the fuel could not fully evaporate. As a result, wall impingement can be occurred, and THC and CO would be increased. To eliminate the wall impingement, the injection timing of the first injection was then retarded to 35-30° BTDC, and the piston bowl geometry was modified to capture droplets in the piston bowl. Subsequently, NOx and soot were reduced substantially. Finally, the piston bowl shape was modified again for spray re-entrance. In these results, NOx and soot were significantly reduced in all split conditions. The modified piston bowl shape was produced and validated in the engine experiment.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    The Effects of Injection Timing and Piston Bowl Shape on PHCCI Combustion with Split injections


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Choi, Hoimyoung (Autor:in) / Chung, Jaewoo (Autor:in) / Lee, Sangyul (Autor:in)

    Kongress:

    SAE 2010 World Congress & Exhibition ; 2010



    Erscheinungsdatum :

    2010-04-12




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    Influence of Injection Timing and Piston Bowl Geometry on PCCI Combustion and Emissions

    Bhave, Amit / Dris, Antonis / Su, Haiyun et al. | SAE Technical Papers | 2009



    Injection Timing and Bowl Configuration Effects on In-Cylinder Particle Mass

    Zarling, Darrick D. / Kittelson, David B. / Luo, Lang et al. | SAE Technical Papers | 1992