The purpose of this study was to investigate how autoignition leads to the occurrence of pressure oscillations. That was done on the basis of in-cylinder visualization and analysis of flame images captured with a high-speed camera using an optically accessible engine, in-cylinder pressure measurement and measurement of light emission from formaldehyde (HCHO). The results revealed that knocking intensity tended to be stronger with a faster localized growth speed of autoignition. An investigation was also made of the effect of exhaust gas recirculation (EGR) as a means of reducing knocking intensity. The results showed that the application of EGR advanced the ignition timing, thereby reducing knocking intensity under the conditions where knocking occurred.
A Study of the Factors Determining Knocking Intensity Based on High-Speed Observation of End-Gas Autoignition Using an Optically Accessible Engine
Sae Technical Papers
SAE/JSAE Small Engine Technology Conference ; 2018
2018-10-30
Aufsatz (Konferenz)
Englisch
A Study of Knocking in a Lean Mixture Using an Optically Accessible Engine
SAE Technical Papers | 2016
|Influence of EGR on Knocking in an HCCI Engine Using an Optically Accessible Engine
SAE Technical Papers | 2016
|The Autoignition of Isobutane in a Knocking Spark Ignition Engine
SAE Technical Papers | 1987
|The autoignition of isobutane in a knocking spark ignition engine
Kraftfahrwesen | 1987
|Characterization of Autoignition in a Knocking SI Engine Using Heat Release Analysis
SAE Technical Papers | 2006
|