A particulate trap with combined regeneration has been developed for use in light duty vehicles with diesel engines. This new system was tested first on an engine test rig. On-road vehicle tests are going on since August 1998. The results obtained clearly demonstrate the feasibility of this system. With this system trap regeneration has to be ensured under worst case conditions (exhaust gas temperature<400° C). To meet this requirement electrical heating in combination with a fuel-borne catalyst is applied. Different filter materials such as cordierite wall flow and silicon carbide monoliths were tested on the engine test rig. The paper reports on results from the engine test rig as well as from on-road vehicle testing. An overview about pre-heating and regeneration examples are given and energy balances are presented.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Particulate Trap Technology for Light Duty Vehicles with a New Regeneration Strategy


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:

    Kongress:

    CEC/SAE Spring Fuels & Lubricants Meeting & Exposition ; 2000



    Erscheinungsdatum :

    2000-06-19




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Particulate trap technology for light duty vehicle with a new regeneration strategy

    Zikoridse,G. / Velji,A. / Heidrich,E. et al. | Kraftfahrwesen | 2000


    Pollutants emissions during mild catalytic diesel particulate filter regeneration in light-duty vehicles

    Villata,G. / Tarabocchia,A. / Bozzolini,V. et al. | Kraftfahrwesen | 2009



    Diesel Particulate Trap Regeneration Techniques

    White, J. E. / Florek, J. J. / Wade, W. R. | SAE Technical Papers | 1981


    Regeneration Behavior of Light-Duty Catalytic Trap Oxidizer Systems

    Buchman,M. / Euga,B.E. / Johnson Matthey,US | Kraftfahrwesen | 1984