The NVH performance is one of the most important concerns in vehicle development. For all-wheel drive (AWD) vehicles and rear-wheel (RWD) drive vehicles, prop shaft is a major transmission component which may cause various NVH problems. This paper focuses on the vehicle NVH problems caused by the second order excitation force of prop shaft. In order to control the NVH performance of the prop shaft efficiently and fundamentally, this work first studied the rotation kinematical characteristics of prop shaft. Then a rigid-elastic coupling model of vehicle driveline was built with the theory of multi-body dynamics. With this model, the sensitive factors that may affect the second order excitation force were investigated. This paper also describes a case study to verify the conclusions which are revealed from the theoretical calculation and the simulation. In this case, a vehicle vibration problem caused by the second order excitation force of prop shaft was successfully solved by following the indicative conclusions mentioned above. The main significance of this study is to establish an effective approach for analyzing and controlling the NVH issues related to vehicle driveline system. The indicative conclusions of this work could be referred by NVH engineers in the early phase of vehicle development.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    A Study on the NVH Problems Caused by the Additional Excitation Force of Propeller Shaft


    Weitere Titelangaben:

    Sae Technical Papers


    Beteiligte:
    Xu, Yong (Autor:in)

    Kongress:

    Noise and Vibration Conference and Exhibition ; 2017



    Erscheinungsdatum :

    2017-06-05




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch





    PROPELLER SHAFT YOKE AND PROPELLER SHAFT

    KUBO MASASHI / ISHIKURA KENICHIRO | Europäisches Patentamt | 2022

    Freier Zugriff

    PROPELLER SHAFT MANUFACTURING METHOD AND PROPELLER SHAFT

    AOKI HIDEKAZU / TSUTSUMI DAIKI / AKITA YASUSHI et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    SUPPORTING FORCE-ENHANCED PROPELLER SHAFT CENTER BEARING

    BAE BYEONG HOON | Europäisches Patentamt | 2017

    Freier Zugriff

    PROPELLER SHAFT

    AOKI HIDEKAZU / ISHIKURA KENICHIRO | Europäisches Patentamt | 2022

    Freier Zugriff