When evaluating the wear properties of slide bearings for car engines, it is a common practice to conduct long-term physical test using a bearing tester for screening purposes according to the revolution speed of the shaft, supply oil temperature and bearing pressure experienced in the actual use of engines. The loading waveform applied depends on the capability of the tester that is loaded, and it is often difficult to apply a loading waveform equivalent to that of actual engines. To design an engine that is more compact or lighter, it is necessary to reduce the dimensions of slide bearings and the distance between bearings. This requires loading tests on a newly designed engine by applying a loading waveform equivalent to that of actual engines to slide bearings and their vicinity before conducting a firing test.We therefore conducted an engine firing test by attaching thin-film sensors to the slide bearing part of the engine and measured the actual load distribution. We then reproduced a loading waveform in the bearing tester to allow testing under conditions equivalent to those of actual engines.Using this newly developed tester, we conducted basic tests on the relationship between the width and wear and between the oil temperature and wear of the slide bearing. As a result, we have found that wear decreases as the width of the slide bearing increases and wear increases as the supply oil temperature increases. Nevertheless, wear does not change linearly in this phenomenon, suggesting that the effective area under pressure and the decrease of viscosity are also relevant.


    Zugriff

    Zugriff prüfen

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Wear Properties of Car Engine Shaft in Actual Engine Environment


    Weitere Titelangaben:

    Sae Int. J. Fuels Lubr
    Sae International Journal of Fuels and Lubricants


    Beteiligte:
    Koga, Hideharu (Autor:in) / Matsumoto, Kenji (Autor:in) / Mihara, Yuji (Autor:in)

    Kongress:

    SAE 2015 World Congress & Exhibition ; 2015



    Erscheinungsdatum :

    2015-04-14


    Format / Umfang :

    4 pages




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch


    Schlagwörter :


    Wear properties of car engine shaft in actual engine environment

    Matsumoto,K. / Koga,H. / Mihara,Y. et al. | Kraftfahrwesen | 2015


    Engine Wear

    Pfeifer, P. E. | SAE Technical Papers | 1964


    Supercharged Engine Performance, Calculated and Actual

    CHENOWETH, OPIE | SAE Technical Papers | 1927


    COMPOUND ENGINE ASSEMBLY WITH OFFSET TURBINE SHAFT, ENGINE SHAFT AND INLET DUCT

    LAMARRE SYLVAIN / FONTAINE MIKE / JULIEN ANDRE et al. | Europäisches Patentamt | 2023

    Freier Zugriff

    Supercharged engine performance, calculated and actual

    Chenoweth, O. | Engineering Index Backfile | 1927